Rekey Old Style Weiser Locks Key in Knobs | Vancouver West

Rekey Old Style Weiser Locks Key in Knobs Vancouver West

Rekey Old Style Weiser Locks Mr. Locksmith Vancouver West (604) 760-7620

Lots of these Rekey old style Weiser Locks Key-in-Knobs still in use. Rekeying Locks

Rekey Old Style Weiser Locks Key-in-knobs where extremely popular long, long time ago, it was everywhere in North America. Nowadays we see less and less of them, but it’s still important to know how to rekey it. One of the key parts is identifying it. Basically, it could be a knob like that, different colors, it could be an orbit, circular, just different styles of the rose and how the lock comes out. Now one way of identifying it was, a lot of them have the push and turn lock. So on the inside to lock it, you just push and turn, and then when the key goes in, here, you turn the key, it just turns a little bit. It just pops it out and then the lock is unlocked.

Now one of the big problems of Rekey Old Style Weiser Key in Knobs is when this handle gets old, it just stays in, so the customer’s turning the key, and the key turns but the lock won’t come undone. That’s another issue, on how to get through that, but right now we’re just going to show you how to rekey them. So to rekey the lock is quite simple, there are just two small screws on here. Go ahead and take the knob off. Just loosen it a little bit, loosen the other one. You have to come in on an angle to get it out. I had somebody ask me once, “Do you have a screwdriver that will do this easier?” And I’m going, no, this is the way it is, unfortunately. Again, the brand name is Weiser, they never, we see a lot of Weiser locks now which are actually Kwikset locks, this was never part of Kwikset, so it only says Weiser, Weiser locks. It takes the Weiser key, in a pinch, you shouldn’t do it, but in a pinch you can use a Kwikset key, but that’s not proper. So basically the knob was just lock-in, and what always happens is that little spring in there would just wear out. Now they used to sell a kit, extra springs, but that was back in the day when you did a lot of repairs, and the people would replace the spring. So the lock is very simple. Take it out; now another way of identifying this, how to take it apart, is there are no holes anywhere, to press the retainer in to remove this cylinder, or the knob. In the back here, see how it’s springy? What we have to do to remove this, we have to hold this out, and then, you see when it was locked, the key only turns that far, to unlock the door. When we wanna rekey it, we pull out the rear post, and at basically the five o’clock, 10 to five position, and it just comes out. And you can see here we can take our bible, to put it back together again, we have our bible, we have the little slot there in the knob, so we’ll put it back at 10 to five, that’s the time I call it, hold out the little post again, and you put it in at 10 to five, and basically put it back in. Sometimes it can be sticky, but the biggest problem is just pull that out, turn it, boom. If you don’t have a key, now it gets a little bit more difficult, but again, it’s a Weiser, it’s extremely easy to pick, just pick it to that position, just pick it over, just hold the post out, pick it to the 10 to five position, and sometimes you can push on this a little bit and it will push out the cylinder. Now to rekey it is interesting. Now if you don’t have key, if you have a key you can take it apart, but if you don’t have a key you have to shim it, and again, it’s a Weiser, it’s easy to pick, easy to shim. So we got the cylinder, so to take out the plug, got the little circlip, and I love this, this is Snap-on, it lasts me forever, and if it breaks they give me a new one. Just gently, just open it up just that little bit. Insert your key, turn it slightly, I have an HPC, hollow follower, just fits on there really nice. And it’s five pins. And we have done enough rekeying videos, this one’s lucky, it’s got the, got the code on there, it’s a direct code. We can just pin it up with the lab kit, and then when you put it back in, just make sure you put it on a slight angle and just put the plug back into the cylinder. Take out the key. I am doing this for the camera, but it’s best to put it on your desk flat. I got my little Snap-on tool. Again, don’t go crazy on opening this, and just put it back on. Always test, test, test. Sounds perfect, clips on good. Now I put it in the 10 to five position. Put my bible into the little spot there. And give it a little twist to make sure that the little post has engaged the back of the lock. So again, there are some different methods, this is the simplest, pull out the post, hold it, some people put a pair of pliers on the back, turn it, now this one did come out extremely easy, let me show you a tougher one here. So that one’s really easy. Here’s another one, this is a real old one I got kicking around. Old one with a new insert. How does this one? See, this one’s not coming out so easy. So again, I’ll just push on the post a little bit, there we go. So basically I’m just pushing on that, and it just pushes it out. So this one’s a little bit more awkward and tougher. And it goes in okay. Rekey Old Style Weiser Key in Knobs. Still see them out there, and you could also see different colors and a different knob style, but again, the secret is it’s got the post on the back.

Rekey Old Wesier Key in Knob Locks

Rekey Old Wesier Key in Knob Locks Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

I hope you enjoyed watching this video, please subscribe to my channel.

Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.


More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

 

Mr. Locksmith Abbotsford For Sale

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.


More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys


Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

 

Mr. Locksmith Abbotsford For Sale

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith Vancouver West

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith Vancouver West

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Recon Medical Tourniquet – (Black) GEN 3 Mil-Spec Kevlar Metal Windlass Aluminum First Aid Tactical Swat Medic Pre-Hospital Life Saving Hemorrhage Control Registration Card, AOS: https://amzn.to/2n0q0R6

Everlit Emergency Survival Trauma Kit with Tourniquet 36″ Splint, Military Combat Tactical IFAK for First Aid Response, Critical Wounds, Gun Shots, Blow Out, Severe Bleeding Control: https://amzn.to/2kXpcMf

IFAK Trauma Kit: Individual First Aid Kit.


First aid kit for locksmiths. We are in our service vehicles all day long. It’s smart to have a first aid kit in your service truck. Also, you should have one in the house and you should have one in your personal car.

Everybody has their personal choices for a First Aid Kit and this is mine. I have a Smith and Weston folding knife with a glass breaker and seat belt cutter. I like having a black marker so you can write the person’s name on their forehead or time a tourniquet was applied, etc.

Some people like a couple of tourniquets in their kit. Also, I have my boo-boo kit, band-aids, butterfly straps, butterfly bandaids, alcohol wipes, iodine wipes, antibiotics, Tylenol, Advil, some stomach medicine, pair of gloves, scissors, tweezers, forceps, space blanket, Israeli bandages, quick clots, gauze, triangular bandage and more.

We are lucky in North America and most Western societies, we have the Good Samaritan Act, as long as you’re trying to help, in most cases you are not going to get sued, we are not doctors, we’re just trying to help.

Take a First Aid Course, methods, procedures and products are getting better every day to help people.

Please Subscribe to my Channel.

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Mr. Locksmith™

http://mrlocksmithtraining.com/about-terry-whin-yates/

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™ Vancouver West

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Vancouver West (604) 760-7620

IFAK Individual First Aid Kit

I Bought the Wrong Inverter | Mr. Locksmith™ Vancouver West

I Bought the Wrong Inverter | Mr. Locksmith™ Vancouver West

Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I bought the wrong inverter. I wanted to be able to put it in my service truck or my camper or whatever, but this is for my service truck. So I wanted to be able to take 12 volts from the battery and be able to plug in 110 key machines. Now, in theory, this is a great deal. This was on sale for like $100, it is a 12 volt to 110 volt Modified sine wave 2,000-watt inverter, it’s more than I need, it’s going be perfect for my key machines. So I thought. I’m not an expert on inverters but the first thing I learned is there are actually two types: Modified Sine Wave and Pure Sine Wave

That will be great for the key machines. However, this is a modified sine and what I need is the pure or the regular Sine Wave. So the problem you’ll run across between the regular wave which is considered clean, and this modified one which is squared off is the modified wave is not good for if you are running computers. So it’s not as clean. That’s why they’re really inexpensive. It is going to cost me two, three, four times more money for getting the proper one I want. And the reason I am not going to use this one, it will do the trick for the basic duplicator key machines, however my Miracle A9S and also my ITL are code machines and they run circuit boards, they are like mini little computers on there. I am going to have to take it back now, it’s really really good but it’s a Modified Wave and I can’t use this on my computer key machines. I’m risking problems. I could be wrong, I am not going to take a chance, I will go out there and get the proper one for my locksmith service truck.

 


Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

I Bought the Wrong Inverter

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Vancouver West (604) 760-7620

Bike Lock vs Cordless Grinder Mr. Locksmith

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Vancouver West

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Vancouver West

 

(604) 259-7618

https://mrlocksmithdelta.com/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

During the Pandemic Lockdown, we had so many break-ins on apartment buildings. They’re stealing the mail, they’re after the GST, they’re after the checks, they’re after whatever checks are coming in. We know for the next several months there’s gonna be a lot of people getting checks, so all the mailboxes getting broken into, we’ve secured this door better. It’s with an astragal. It will stop them from prying. They got the cameras have caught the people. Not caught, they videoed them breaking in. They’re just using little pry bars. They’re spreading the door. With the security plate, it stops them from spreading the door. So, it’s called an astragal or a security plate, whatever you want. This is made out of steel, it is a full length, and it slows them down from prying open the door.

Mr. Locksmith Delta (604) 259-7618

We have had so many break-ins on apartment buildings that are stealing the mail. The criminal are after the GST cheques and trying to steal ID. We know for the next several months, there is going to be a lot of people getting checks, so all the mailboxes are getting broken into. We have secured this door better. It’s with Astragal Security Plate. It will prevent the criminals from prying the gap between the doors. The security camera has caught people on video, not caught, they video them breaking in. They are just using little pry bars they’re spreading the door. With these security plates, it stops them from spreading the door. It is called an Astragal or called a security plate, whatever you want. This is made out of steel. It’s a full length, and it slows them down from prying open the door. This is a typical apartment building and we have a rash, always a rash of break-ins.

To install the Astragal / Security Plate we are going remove all the hardware, and install a full-length Astragal. Remove all the existing hard, door push plates, bars and on some install we remove the lock too. This door has an electronic access control system so we are not reinstalling the door cylinder and in this case they only had a dummy cylinder. I like to install the top of the security plate and let gravity help to line up and mark the holes. I prefer to use sex bolts because it makes a nice flush mount. Do not use pop rivets to secure the plate to the door.

 

Robson Street Vancouver Nike Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

 

How to Install a security plate

Prevent Mailbox Theft with a Security Plate

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

For further information go to http://mrlocksmithgaragedoor.com/

Replace Batteries In Universal Garage Door Remote

  1. Pry open the case.
  2. Remove the old battery. Dispose of old batteries properly.
  3. Insert the replacement battery positive side up. Replace the battery with only 3V CR2032 coin cell batteries.
  4. Replace the cover.

Need a new garage door remote? Garage door malfunctioning? Or looking to upgrade your garage door opener? Mr. Locksmith Garage Door & Repair is your 24 hour garage door repair and locksmith service. We service all residential garage doors such as Craftsman, Liftmaster and more. Need a new garage door cable? New garage door spring? Mr. Locksmith Garage Door & Repair  Vancouver West can help.

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We’ll weatherstrip your garage door for you.

Call Mr. Locksmith Garage Door Repair Vancouver West (604) 760-7620

Garage Door Remote and Batteries:

Energizer CR2032 Batteries, 3V Lithium Coin Cell 2032 Garage Battery, (6 Count) https://amzn.to/2us1CvX

Chamberlain Group KLIK3U-BK Clicker Universal 2-Button Garage Door Opener Remote with Visor Clip, Black https://amzn.to/2Sje9ee

Chamberlain/LiftMaster/Craftsman 940EV-P2 Garage Door Opener Keyless Entry Keypad, Security +2.0 Compatible https://amzn.to/2w7OiNE

Chamberlain Group Chamberlain B970 Smartphone-Controlled Ultra-Quiet & Strong Belt Drive Garage Door Opener with Battery Backup and MAX Lifting Power, Blue https://amzn.to/2SfOHGf

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We will weatherstrip your garage door for you.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith Garage Door Repair & Installation (604) 259-7618

Mr. Locksmith™
————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Liftmaster: How to Change Garage Door Remote Battery

 

How to Open Puzzle Padlock 001 | Mr. Locksmith

How to Open Puzzle Padlock 001 | Mr. Locksmith

For further info go to Mr. Locksmith Vancouver West

This is one of my puzzle locks and it is fun to open. The solid brass puzzle padlock is made of solid brass and weighs 1 kilogram.

To open it is more complex than it appears; it requires a more careful inspection to unlock it. Find the right combination of moves and keys to open it. The lock is handmade and from India.

The puzzle locks were originally made if you were an apprentice locksmith, to prove your skills, you had to make a lock, a chest or a lock or padlock, and three master locksmiths would evaluate your lock. One of the main points was how quickly they could open your lock.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

Mr. Locksmith Puzzle Padlock 001

 

 

 

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

For further info and to purchase Bump Keys go to Mr. Locksmith Vancouver West

Bump Keys: My Grandfather was a locksmith and he called it “Rapping a Cylinder” today we call it “Bumping a Lock” with “Bump Keys.”

When bumping a lock, the key is initially inserted into the keyway the “Castration Rings” helps to keep the Bump Key one notch (pin) short of full insertion.

Bump Keys Castration Rings

Bumping the key inward forces it deeper into the keyway. The bump key transmits a slight impact force to all of the key pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.

The pin movements are highly elastic, the driver pins “jump” from the key pins for a nanosecond, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts only a nanosecond with a light rotational force or tension is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time at the shear of the pins, and the lock can be opened while the driver pins are elevated above the shear line.

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder.

Mr. Locksmith Bump Keys

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.