How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Vancouver West

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Vancouver West: (604) 760-7620

Automotive Locksmith Vancouver: (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.

 

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

How To Cut A Kwikset Key Triton Key Machine: The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, tibbe (6 and 8-cut) and tubular. Custom search functions include the ability to search by vehicle model, keyway or IC card number. In this video, we cut a Kwikset Key (ilco KW1 Key Blank). Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

The Triton code machine is a high-security code machine. So I’ve been using this machine for a couple of weeks now, so far happy with it. First of all, this only, the screen only comes up so far and I can see people yanking at this, I just leave it down, unless I am videoing. The interesting thing is whether this is up or down, it will still cut. So, which is great for me because I don’t have to jerry-rig anything to video. So, but it is a safety feature, this will still cut with this open. Which I don’t have a problem with, but we have to think of the stupid people out there. And can it cut a Kwikset key? Here’s a Kwikset series. I can check my KW1 blank, my key blanks right here listed under key blanks, ESP KW1, go through all my numbers all the different manufacturers, we have ilco there. It’s got all the main ones. The menu displays which jaw I got it on. It says this one should be on a B. Says it has to be cut on a B. Let’s put the key in and that’s a shoulder, check. So I have t it set up to B and I put my input. So I going to cut this. Let’s just cut it as a two, one, three, four, two and it takes it. Then I go okay, I press cut and we will go look at the screen. Now here are my options. So there’s laser-cut, which I don’t like. I like the look of the traditional key. Make sure it is on that. It’s all set up properly and press cut. Okay, now we have a Kwikset key.

Now, one thing when you are cutting the keys the machine needs a metal key brass, metal, etc. I guess because when it is setting up it must put a little bit of a charge. Do not use composite keys, no plastic keys. You will probably  risk damaging the machine and I can see that, cause I think it must have some little sensor in there a little bit of electricity or something like it as it is going on there The instructions state “do not use composite keys.” No plastic keys, 3D printed key blanks, etc.  I do not know the exact reason but I imagine it is because it must put out a small electrical charge. I guess aluminum keys would be okay because aluminum is a  conductor of electricity Brass Key blanks of course and the metal keys and all our other different alloys but nothing that are plastic or composite key blanks. I hope you enjoyed watching this video.

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual.

The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Triton Key Machines Features:

  • A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.
  • Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
  • Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
  • Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
  • A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
  • A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
  • 2-year warranty which protects against all machine failures that result from flaws in manufacturing.
How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

 

List of recommended & replacement accessories:

  • TRJ2 Single-Sided Jaw (residential, commercial and single-sided automotive)
  • TRJ3 Tubular Jaw (decode and cut tubular keys)
  • TRJ4 Tibbe Jaw (decode and cut tibbe keys)
  • TRJ5 Engraving Jaw (customize customer keys with your logo or help them stay organized with key labels)
  • TRC4 Engraving Cutter
  • TRC3A Sharp Dimple Cutter
  • TRC3B Shallow Dimple Cutter
  • TRD2 Dimple Decoder
  • TRC1 2.0 Standard Replacement Cutter
  • TRC2 1.9mm Cutter
  • TRD1 Standard Replacement Decoder
  • TBD1 Mounting Kit
  • TRA4 12-Volt Vehicle Power Adapter (fully power your Triton with nothing more than than a vehicle cigarette lighter)

So stand by for more videos, it is going to be interesting.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

 

How To Cut A Kwikset Key Triton Key Machine

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, How to Cut a KW1 on a Triton Key Machine, Decode KW1 Key, Cut KW1 Key, 

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Vancouver West (604) 760-7620

Bike Lock vs Cordless Grinder Mr. Locksmith

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

For further information go to http://mrlocksmithgaragedoor.com/

Replace Batteries In Universal Garage Door Remote

  1. Pry open the case.
  2. Remove the old battery. Dispose of old batteries properly.
  3. Insert the replacement battery positive side up. Replace the battery with only 3V CR2032 coin cell batteries.
  4. Replace the cover.

Need a new garage door remote? Garage door malfunctioning? Or looking to upgrade your garage door opener? Mr. Locksmith Garage Door & Repair is your 24 hour garage door repair and locksmith service. We service all residential garage doors such as Craftsman, Liftmaster and more. Need a new garage door cable? New garage door spring? Mr. Locksmith Garage Door & Repair  Vancouver West can help.

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We’ll weatherstrip your garage door for you.

Call Mr. Locksmith Garage Door Repair Vancouver West (604) 760-7620

Garage Door Remote and Batteries:

Energizer CR2032 Batteries, 3V Lithium Coin Cell 2032 Garage Battery, (6 Count) https://amzn.to/2us1CvX

Chamberlain Group KLIK3U-BK Clicker Universal 2-Button Garage Door Opener Remote with Visor Clip, Black https://amzn.to/2Sje9ee

Chamberlain/LiftMaster/Craftsman 940EV-P2 Garage Door Opener Keyless Entry Keypad, Security +2.0 Compatible https://amzn.to/2w7OiNE

Chamberlain Group Chamberlain B970 Smartphone-Controlled Ultra-Quiet & Strong Belt Drive Garage Door Opener with Battery Backup and MAX Lifting Power, Blue https://amzn.to/2SfOHGf

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We will weatherstrip your garage door for you.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith Garage Door Repair & Installation (604) 259-7618

Mr. Locksmith™
————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Liftmaster: How to Change Garage Door Remote Battery

 

How to Open Puzzle Padlock 001 | Mr. Locksmith

How to Open Puzzle Padlock 001 | Mr. Locksmith

For further info go to Mr. Locksmith Vancouver West

This is one of my puzzle locks and it is fun to open. The solid brass puzzle padlock is made of solid brass and weighs 1 kilogram.

To open it is more complex than it appears; it requires a more careful inspection to unlock it. Find the right combination of moves and keys to open it. The lock is handmade and from India.

The puzzle locks were originally made if you were an apprentice locksmith, to prove your skills, you had to make a lock, a chest or a lock or padlock, and three master locksmiths would evaluate your lock. One of the main points was how quickly they could open your lock.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to Mr. Locksmith

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

Mr. Locksmith Puzzle Padlock 001

 

 

 

Best Locksmith Tweezers | Mr. Locksmith Vancouver West

Best Locksmith Tweezers | Mr. Locksmith Vancouver West

For further info and to purchase the Locksmith Tweezer go to Mr. Locksmith Vancouver West.

This is the best locksmith tweezer I have ever used and a “must have” for new and experienced locksmiths. The tweezers are made of stainless steel and the tip of the tweezer has been milled and has a grooved tip for fast and easy loading of cylinder pins. Straight and parallel blades provide ease for rekeying locks and top-pin loading,

Pinning Tweezers are a must have for gripping the small bottom pins, top pins, drivers and lock springs.

The Locksmith tweezers are made of stainless steel that will not bend or flex, these slim tweezers can help pinning lock driver pins from inside the lock. If you need to work with locks internal components this is the perfect tool for you or any locksmith or hobbyist.

Mr. Locksmith Tweezers are:
High Quality Brushed Stainless Steel
Length for Easy Handling
Grooved Tip Design for easy grasping of pins
Ribbed Sides prevent fingers slipping
Notch is Milled to a fine edge for Grasping Thin master pins
Locksmith Tools
Locksmith Tweezers for pinning locks
Locksmith Tweezer for rekeying locks

Mr. Locksmith Tweezers

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

For further info and to purchase Bump Keys go to Mr. Locksmith Vancouver West

Bump Keys: My Grandfather was a locksmith and he called it “Rapping a Cylinder” today we call it “Bumping a Lock” with “Bump Keys.”

When bumping a lock, the key is initially inserted into the keyway the “Castration Rings” helps to keep the Bump Key one notch (pin) short of full insertion.

Bump Keys Castration Rings

Bumping the key inward forces it deeper into the keyway. The bump key transmits a slight impact force to all of the key pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.

The pin movements are highly elastic, the driver pins “jump” from the key pins for a nanosecond, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts only a nanosecond with a light rotational force or tension is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time at the shear of the pins, and the lock can be opened while the driver pins are elevated above the shear line.

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder.

Mr. Locksmith Bump Keys

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

 

 

Gun Safe Recalled Over Lock Failure

Gun Safe Recalled Over Lock Failure

For further info go to Mr. Locksmith.

A gun safe has been recalled because of a malfunction that allows it to be opened without a key or combination. The recall is for the Stack-On Sentinel model safe made by Alpha Guardian.

According to the Consumer Product and Safety Commission, a bolt malfunction can cause the safe to open without the use of a key combination. That lock failure allows access to any firearms stored inside, posing a safety hazard.

The black steel safe has the name “Sentinel” on it. The style number FSS18-64-MB-E-S can be found on the shipping packaging.

A gun safe sold at Dick’s Sporting Goods stores nationwide in November and December 2018 is being recalled due to an issue with the safe’s locking mechanism, the U.S. Consumer Product Safety Commission says.

Alpha Guardian has received one report of the safe opening without the use of a key or combination, which would mean someone could access the guns stored inside without authorization, the CPSC said.

The Consumer Product Safety Commission reported that Alpha Guardian has announced a recall on its Stack-On Gun Safes due to a possible bolt malfunction which could result in failure to lock and possible injury and said consumers should immediately stop using the safe and contact Alpha Guardian for information on receiving a replacement safe or a full refund.

The mishap causes the safe to open without a key or combination.

The style number is FSS18-64-MB-E-S and can be found on the shipping packaging.

The safes were sold at Dick’s Sporting Goods stores nationwide from November 2018 through December 2018 for about $700.

Consumers are asked to stop using the safes immediately and contact Alpha Guardian at 833-255-9827, at [email protected] or online for a full refund or replacement

Name of product: Stack-On Sentinel gun safe.
Hazard: A bolt malfunction can cause the safe to open without the use of a key or combination, allowing access to any firearms stored inside, posing an injury hazard.
Remedy: Refund, Replace
Recall date: March 21, 2019
Units: Approximately 1,250

Sentinel Gun Safe Recalled

Gun safe recalled

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

 

Teaching My Daughter How To Become A Locksmith – Take Your Kids To Work Day

 

 

 

 

 

Does your son or daughter want to become a locksmith? My daughter, Hazel is a highly intelligent girl with many skills so I asked my daughter Hazel to join me and learn skills such as how to pick a lock and how to cut a key for “Take Your Kids to Work Day.”

Picking a lock does require skill, but they are skills you can learn with practice. I do teach the same skills I’ve taught Hazel, and additional locksmithing skills over at my 1-day classes and 4-day classes available at MrLocksmithTraining.com.

What I find amusing is if a teenager is able to pick a lock in seconds with basic instructions, why do many locksmiths have issues with picking basic locks and go straight to drilling it? Locksmith training is available from myself at MrLocksmithTraining.com in Canada, the USA and Asia.

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith Vancouver West

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith Vancouver West

For more info and to purchase a Lab pin kit go to Mr. Locksmith Vancouver West

My favorite Lab pin kit for the locksmith service vehicle is the Lab Dur X Semi Pro Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

DUR-X Semi-Pro Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

LDKU3
– .003 Increments
– 124 Pin sizes, 1 Spring size 115L
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Lightweight and made of super tough polyethylene
– Triple latches with double snap protection
– Center lid carrying handle
– Seal-Tight Lid prevents pins from mixing
– 50 pins per pocket, 100 springs per pocket
– Key slots for mounting to workbench
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 22-1/2″ x 8-1/4″ x 3″

To purchase the LAB DUR X Semi Pro 003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”