Milwaukee PACKOUT 3 Drawer Toolbox | Mr. Locksmith Vancouver West

Milwaukee PACKOUT 3 Drawer Toolbox | Mr. Locksmith™ Vancouver West: The Milwaukee Modular Storage System is a durable storage system. The PACKOUT 3-Drawer Tool Box has a 50lbs weight capacity and a locking security bar allows you to padlock the drawers closed keeping them securely shut during transport.

Milwaukee Drawer Toolbox

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West(604) 259-7617

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS: https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

The tool box is constructed with impact resistant polymers, all-metal ball bearing slides, and metal reinforced corners for ultimate jobsite durability. The 3-Drawer Tool Box also allows you to customize their drawer layout with Quick-Adjust Dividers.

The PACKOUT™ Modular Storage System allows you to customize your storage system for easy transportation and organization of tools and accessories.

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

I love my Milwaukee PACKOUT kit, kits and all my bits and pieces. I am super happy now. Had the two drawer the other day. Just got my three drawer in. Absolutely in love. I’m revamping how I do everything. This goes into the truck, the service truck nicely, goes into the shop nicely. I’m looking at a racking system. I’m happy with my wheeled cart. Getting older. We have a lot of apartment buildings.

I have my PACKOUTS for my mailbox kit, my deadbolts, and I just modular how I do things, or just grab it out of the truck or out of the shop. I don’t keep a lot of my safe opening gear in the service truck. I keep it in the shop. When I need it, I take out what I need and go to the job site. So this is gonna be great for locksmiths. I can lock it on the job tighter in the truck. Just added security. I have the smaller drawers, which is good for my pin kits. I don’t need the big drawers. This is gonna be full of deadbolts, Adams rite, the larger locks. This’ll be the, more the specialty lockout tools, maybe more the cylinders.

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

My mailboxes are in a special PACKOUT already. So this will be like the different pin kits, my medical pin kit, my multi lock pin kit. So this will hold my more specialty tools, my pin kits, my medical pin kit, my lab pin kit. This is gonna be interesting. So I’ll start working on getting it all together. This is going to be great. I will have more videos coming on how I am setting up all my locksmith tools and gear and the stock into the kits.

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West(604) 259-7617

 

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ Vancouver West email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching! 🙂

Milwaukee PACKOUT 3 Drawer Toolbox

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Knipex Bolt Cutter For Locksmiths | Mr. Locksmith Vancouver West

Knipex Bolt Cutter: This mini bolt cutter can cut through more than you ever thought possible. It’s ideal for Mr. Locksmith™ Vancouver West or anyone who appreciates quality tools.

 

Knipex Bolt Cutter

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive Vancouver West(604) 259-7617

Knipex Cobolt Compact Bolt Cutter

An all-around tool for the toughest demands, this Knipex high-leverage CoBolt cutter features a lever action design that applies 20 times more hand force for superior cutting power with less effort when compared to older models. This mini bolt cutter can cut through more than you ever thought possible. It’s ideal for Locksmiths, automotive or construction applications, cutting cotter pins and nails, repeated use in factory assembly lines, cutting wire fencing in agricultural settings, or even everyday tasks such as cutting floral wire or fish hooks.

Forged from chrome vanadium electric steel, these cutters are built to last. This lightweight cutter features precision-matched cutting edges for cutting soft or hard steel.It also features gripping jaws below the joint for gripping and pulling nails and wires.

  • Plastic Coated Handles
  • Cuts Material like Bolts, Nails, Rivets up to 5.2mm
  • Exceptional Cutting Performance with Minimum Effort Due to Lever Action Design
  • Cutting Edges Induction Hardened, Cutting Edge Hardness Approximately 64 HRC
  • Chrome Vanadium Electric Steel, Oil-Hardened and Tempered

Knipex Bolt Cutters For Locksmith | Mr Locksmith Video

#mrlocksmithvancouverwest #locksmithtraining #locksmithtools

Knipex Bolt Cutter Review

I have had this Knipex Bolt Cutter Tool for the last couple years. It is expensive. I have had this for about two years now. It is a Knipex. It’s a German made. It is a fantastic tool. I have this in my tool case and I use it everyday. Because of the way this Bolt Cutter has performed as a superb tool, I purchase more Knipex products now and I am extremely happy with them. Cry once or cry twice. Cry once buying it. It lasts forever. What I mostly use my Knipex for, what I use mine for is basically when I get a screw too long, I will just cut it down to size, it’s just one-handed. It’s easy. I went slow on this because, so it’s one-handed. It’s easy to chop your screw down. I can take it right down to the thread. You just have to be careful of when it shoots through. If you get a deadbolt or a deadbolt with the lazy cam and I got a skinnier door and I gotta chop this back a little bit and it’s one that doesn’t have the lines on it already. The Knipex, now you just gotta be careful when you shoot it out. No problem at all. Even the hardened steel tail pieces of the hardened ones, it just slices these right through. The other ones don’t do it. For a small package, the Knipex is a fantastic little bolt cutter. It’s extremely handy for me, especially when I’m doing installations. I use it to cut screws and tail pieces every day now. So, love it. It’s been in my case, look at it. It looks brand new. It’s been in my case for about two years and the jaws are still perfect and I’ve probably cut a few things that were too big for this and the jaws are absolutely perfect. Please subscribe to my video. Please like it. Hope you enjoyed it. I have more videos coming on more locksmith tools that I use every day. I hope you enjoyed watching this video. Subscribe to my channel. Also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Vancouver West

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Vancouver West

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

Knipex Pliers

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Vancouver West can help you. Call Emergency Locksmith Vancouver West British Columbia.

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West(604) 259-7617

Mr. Locksmith™ Vancouver West

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Vancouver West

Knipex Bolt Cutters For Locksmith | Mr. Locksmith Vancouver West

 

Knipex Bolt Cutter, Knipex Bolt Cutters, Knipex bolt cutter review, knipex mini bolt cutters, best mini bolt cutters, Knipex Bolt Cutter Locksmith, Knipex Bolt Cutter Locksmith Tools, Knipex Cobolt Compact Bolt Cutter, Knipex Compact Bolt Cutter,

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

How To Cut A Kwikset Key Triton Key Machine: The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, tibbe (6 and 8-cut) and tubular. Custom search functions include the ability to search by vehicle model, keyway or IC card number. In this video, we cut a Kwikset Key (ilco KW1 Key Blank). Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

The Triton code machine is a high-security code machine. So I’ve been using this machine for a couple of weeks now, so far happy with it. First of all, this only, the screen only comes up so far and I can see people yanking at this, I just leave it down, unless I am videoing. The interesting thing is whether this is up or down, it will still cut. So, which is great for me because I don’t have to jerry-rig anything to video. So, but it is a safety feature, this will still cut with this open. Which I don’t have a problem with, but we have to think of the stupid people out there. And can it cut a Kwikset key? Here’s a Kwikset series. I can check my KW1 blank, my key blanks right here listed under key blanks, ESP KW1, go through all my numbers all the different manufacturers, we have ilco there. It’s got all the main ones. The menu displays which jaw I got it on. It says this one should be on a B. Says it has to be cut on a B. Let’s put the key in and that’s a shoulder, check. So I have t it set up to B and I put my input. So I going to cut this. Let’s just cut it as a two, one, three, four, two and it takes it. Then I go okay, I press cut and we will go look at the screen. Now here are my options. So there’s laser-cut, which I don’t like. I like the look of the traditional key. Make sure it is on that. It’s all set up properly and press cut. Okay, now we have a Kwikset key.

Now, one thing when you are cutting the keys the machine needs a metal key brass, metal, etc. I guess because when it is setting up it must put a little bit of a charge. Do not use composite keys, no plastic keys. You will probably  risk damaging the machine and I can see that, cause I think it must have some little sensor in there a little bit of electricity or something like it as it is going on there The instructions state “do not use composite keys.” No plastic keys, 3D printed key blanks, etc.  I do not know the exact reason but I imagine it is because it must put out a small electrical charge. I guess aluminum keys would be okay because aluminum is a  conductor of electricity Brass Key blanks of course and the metal keys and all our other different alloys but nothing that are plastic or composite key blanks. I hope you enjoyed watching this video.

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual.

The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Triton Key Machines Features:

  • A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.
  • Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
  • Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
  • Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
  • A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
  • A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
  • 2-year warranty which protects against all machine failures that result from flaws in manufacturing.
How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

 

List of recommended & replacement accessories:

  • TRJ2 Single-Sided Jaw (residential, commercial and single-sided automotive)
  • TRJ3 Tubular Jaw (decode and cut tubular keys)
  • TRJ4 Tibbe Jaw (decode and cut tibbe keys)
  • TRJ5 Engraving Jaw (customize customer keys with your logo or help them stay organized with key labels)
  • TRC4 Engraving Cutter
  • TRC3A Sharp Dimple Cutter
  • TRC3B Shallow Dimple Cutter
  • TRD2 Dimple Decoder
  • TRC1 2.0 Standard Replacement Cutter
  • TRC2 1.9mm Cutter
  • TRD1 Standard Replacement Decoder
  • TBD1 Mounting Kit
  • TRA4 12-Volt Vehicle Power Adapter (fully power your Triton with nothing more than than a vehicle cigarette lighter)

So stand by for more videos, it is going to be interesting.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

 

How To Cut A Kwikset Key Triton Key Machine

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, How to Cut a KW1 on a Triton Key Machine, Decode KW1 Key, Cut KW1 Key, 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Vancouver: (604) 760-7620

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West

How To Fix a Sticky Lock Vancouver West

How To Fix a Sticky Lock Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

For further information go to https://mrlocksmithvancouverwest.com/

If you have a sticky lock, whether it’s on your house, your business, a padlock, or your car door, a car ignition is different, if you have a sticky lock, there is a couple of solutions you can do.

Never, never put oil, or linseed oil, or motor oil, or sewing machine oil, or even graphite. Graphite, do not put that into your lock. Now, WD-40 is penetrating oil. It’s fantastic for getting a sticky lock unstuck but is not a lubricant.

My favorite for a lock is Tri-Flow, just love this stuff. Put a little spray, it does not take a lot, just put a little spray into your lock and it will be fantastic. Or now you know Lock Saver, there’s Houdini. I don’t have any Houdini handy, but this is my go-to is Tri-Flow. So again, WD-40 for sticky locks. It will unstick it, but it’s not gonna lubricate it. Tri-Flow will lubricate the lock perfectly.

Do not use graphite, graphite is bad for you. It’s not good for the locks. It’s an old way of lubricating locks, don’t do it. So go to Tri-Flow. If the lubricant does not work, it could because your key is old and worn, especially on cars we find that a lot. So cutting you a brand new key to factory code, the lock usually works perfectly after that. So it could be a worn key. Your lock could be worn and the lubricant may be a temporary fix, but it is not going to fix the problem. You have an old lock on your door or the padlock’s old, it’s worn out, you need a new lock. And sometimes, especially with the Honda ignitions, the high security, sometimes the ignition needs to be, the parts, replaced, and you would need a new key because those things just seem to wear out.

How to Fix a Sticky lock Vancouver West

How to Fix a Sticky lock Vancouver West

The other issue could be that the door is sticking. So it could be the hinges are dropping, or what really happens, with the change of weather, is the latch, or the deadbolt specifically, is not lined up anymore with the hole. So I have a few more videos on how to fix that. But the way to see if it is the problem is the door frame is open the door and does the key work the lock perfectly? So if the door is open and you can turn the lock perfectly and then when you close the door and it does not lock, then the problem is with your door frame. However, if you open the door, try the key, and it’s still jammed, then the problem is your door.

Locked Out because of a Sticky Lock?

In conclusion, do not use WD-40, oil, linseed oil and do not use sewing machine oil. WD-40 is, a penetrating oil, it’s good but it is not going to lubricate your lock. Use a Lubricant that is meant for locks, Tri-Flow is my favorite. Lock Saver and Houdini are good.

If you have any recommendations, put it at the bottom. So this will help you with sticky locks.

Mr. Locksmith™

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

How to Fix a Sticky Lock Vancouver West

How to Fix a Sticky Lock Vancouver West

Rekey Old Style Weiser Locks Key in Knobs | Vancouver West

Rekey Old Style Weiser Locks Key in Knobs Vancouver West

Rekey Old Style Weiser Locks Mr. Locksmith Vancouver West (604) 760-7620

Lots of these Rekey old style Weiser Locks Key-in-Knobs still in use. Rekeying Locks

Rekey Old Style Weiser Locks Key-in-knobs where extremely popular long, long time ago, it was everywhere in North America. Nowadays we see less and less of them, but it’s still important to know how to rekey it. One of the key parts is identifying it. Basically, it could be a knob like that, different colors, it could be an orbit, circular, just different styles of the rose and how the lock comes out. Now one way of identifying it was, a lot of them have the push and turn lock. So on the inside to lock it, you just push and turn, and then when the key goes in, here, you turn the key, it just turns a little bit. It just pops it out and then the lock is unlocked.

Now one of the big problems of Rekey Old Style Weiser Key in Knobs is when this handle gets old, it just stays in, so the customer’s turning the key, and the key turns but the lock won’t come undone. That’s another issue, on how to get through that, but right now we’re just going to show you how to rekey them. So to rekey the lock is quite simple, there are just two small screws on here. Go ahead and take the knob off. Just loosen it a little bit, loosen the other one. You have to come in on an angle to get it out. I had somebody ask me once, “Do you have a screwdriver that will do this easier?” And I’m going, no, this is the way it is, unfortunately. Again, the brand name is Weiser, they never, we see a lot of Weiser locks now which are actually Kwikset locks, this was never part of Kwikset, so it only says Weiser, Weiser locks. It takes the Weiser key, in a pinch, you shouldn’t do it, but in a pinch you can use a Kwikset key, but that’s not proper. So basically the knob was just lock-in, and what always happens is that little spring in there would just wear out. Now they used to sell a kit, extra springs, but that was back in the day when you did a lot of repairs, and the people would replace the spring. So the lock is very simple. Take it out; now another way of identifying this, how to take it apart, is there are no holes anywhere, to press the retainer in to remove this cylinder, or the knob. In the back here, see how it’s springy? What we have to do to remove this, we have to hold this out, and then, you see when it was locked, the key only turns that far, to unlock the door. When we wanna rekey it, we pull out the rear post, and at basically the five o’clock, 10 to five position, and it just comes out. And you can see here we can take our bible, to put it back together again, we have our bible, we have the little slot there in the knob, so we’ll put it back at 10 to five, that’s the time I call it, hold out the little post again, and you put it in at 10 to five, and basically put it back in. Sometimes it can be sticky, but the biggest problem is just pull that out, turn it, boom. If you don’t have a key, now it gets a little bit more difficult, but again, it’s a Weiser, it’s extremely easy to pick, just pick it to that position, just pick it over, just hold the post out, pick it to the 10 to five position, and sometimes you can push on this a little bit and it will push out the cylinder. Now to rekey it is interesting. Now if you don’t have key, if you have a key you can take it apart, but if you don’t have a key you have to shim it, and again, it’s a Weiser, it’s easy to pick, easy to shim. So we got the cylinder, so to take out the plug, got the little circlip, and I love this, this is Snap-on, it lasts me forever, and if it breaks they give me a new one. Just gently, just open it up just that little bit. Insert your key, turn it slightly, I have an HPC, hollow follower, just fits on there really nice. And it’s five pins. And we have done enough rekeying videos, this one’s lucky, it’s got the, got the code on there, it’s a direct code. We can just pin it up with the lab kit, and then when you put it back in, just make sure you put it on a slight angle and just put the plug back into the cylinder. Take out the key. I am doing this for the camera, but it’s best to put it on your desk flat. I got my little Snap-on tool. Again, don’t go crazy on opening this, and just put it back on. Always test, test, test. Sounds perfect, clips on good. Now I put it in the 10 to five position. Put my bible into the little spot there. And give it a little twist to make sure that the little post has engaged the back of the lock. So again, there are some different methods, this is the simplest, pull out the post, hold it, some people put a pair of pliers on the back, turn it, now this one did come out extremely easy, let me show you a tougher one here. So that one’s really easy. Here’s another one, this is a real old one I got kicking around. Old one with a new insert. How does this one? See, this one’s not coming out so easy. So again, I’ll just push on the post a little bit, there we go. So basically I’m just pushing on that, and it just pushes it out. So this one’s a little bit more awkward and tougher. And it goes in okay. Rekey Old Style Weiser Key in Knobs. Still see them out there, and you could also see different colors and a different knob style, but again, the secret is it’s got the post on the back.

Rekey Old Wesier Key in Knob Locks

Rekey Old Wesier Key in Knob Locks Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

I hope you enjoyed watching this video, please subscribe to my channel.

Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Vancouver West

How to Install a Security Plate on Aluminum Storefront Door | Mr. Locksmith™ Vancouver West

 

(604) 259-7618

https://mrlocksmithdelta.com/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

During the Pandemic Lockdown, we had so many break-ins on apartment buildings. They’re stealing the mail, they’re after the GST, they’re after the checks, they’re after whatever checks are coming in. We know for the next several months there’s gonna be a lot of people getting checks, so all the mailboxes getting broken into, we’ve secured this door better. It’s with an astragal. It will stop them from prying. They got the cameras have caught the people. Not caught, they videoed them breaking in. They’re just using little pry bars. They’re spreading the door. With the security plate, it stops them from spreading the door. So, it’s called an astragal or a security plate, whatever you want. This is made out of steel, it is a full length, and it slows them down from prying open the door.

Mr. Locksmith Delta (604) 259-7618

We have had so many break-ins on apartment buildings that are stealing the mail. The criminal are after the GST cheques and trying to steal ID. We know for the next several months, there is going to be a lot of people getting checks, so all the mailboxes are getting broken into. We have secured this door better. It’s with Astragal Security Plate. It will prevent the criminals from prying the gap between the doors. The security camera has caught people on video, not caught, they video them breaking in. They are just using little pry bars they’re spreading the door. With these security plates, it stops them from spreading the door. It is called an Astragal or called a security plate, whatever you want. This is made out of steel. It’s a full length, and it slows them down from prying open the door. This is a typical apartment building and we have a rash, always a rash of break-ins.

To install the Astragal / Security Plate we are going remove all the hardware, and install a full-length Astragal. Remove all the existing hard, door push plates, bars and on some install we remove the lock too. This door has an electronic access control system so we are not reinstalling the door cylinder and in this case they only had a dummy cylinder. I like to install the top of the security plate and let gravity help to line up and mark the holes. I prefer to use sex bolts because it makes a nice flush mount. Do not use pop rivets to secure the plate to the door.

 

Robson Street Vancouver Nike Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

 

How to Install a security plate

Prevent Mailbox Theft with a Security Plate

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

Liftmaster: How to Change Garage Door Remote Battery Vancouver West (604) 760-7620

For further information go to http://mrlocksmithgaragedoor.com/

Replace Batteries In Universal Garage Door Remote

  1. Pry open the case.
  2. Remove the old battery. Dispose of old batteries properly.
  3. Insert the replacement battery positive side up. Replace the battery with only 3V CR2032 coin cell batteries.
  4. Replace the cover.

Need a new garage door remote? Garage door malfunctioning? Or looking to upgrade your garage door opener? Mr. Locksmith Garage Door & Repair is your 24 hour garage door repair and locksmith service. We service all residential garage doors such as Craftsman, Liftmaster and more. Need a new garage door cable? New garage door spring? Mr. Locksmith Garage Door & Repair  Vancouver West can help.

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We’ll weatherstrip your garage door for you.

Call Mr. Locksmith Garage Door Repair Vancouver West (604) 760-7620

Garage Door Remote and Batteries:

Energizer CR2032 Batteries, 3V Lithium Coin Cell 2032 Garage Battery, (6 Count) https://amzn.to/2us1CvX

Chamberlain Group KLIK3U-BK Clicker Universal 2-Button Garage Door Opener Remote with Visor Clip, Black https://amzn.to/2Sje9ee

Chamberlain/LiftMaster/Craftsman 940EV-P2 Garage Door Opener Keyless Entry Keypad, Security +2.0 Compatible https://amzn.to/2w7OiNE

Chamberlain Group Chamberlain B970 Smartphone-Controlled Ultra-Quiet & Strong Belt Drive Garage Door Opener with Battery Backup and MAX Lifting Power, Blue https://amzn.to/2SfOHGf

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We will weatherstrip your garage door for you.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith Garage Door Repair & Installation (604) 259-7618

Mr. Locksmith™
————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Liftmaster: How to Change Garage Door Remote Battery