Best Locksmith Tweezers | Mr. Locksmith Vancouver West

Best Locksmith Tweezers | Mr. Locksmith Vancouver West

For further info and to purchase the Locksmith Tweezer go to Mr. Locksmith Vancouver West.

This is the best locksmith tweezer I have ever used and a “must have” for new and experienced locksmiths. The tweezers are made of stainless steel and the tip of the tweezer has been milled and has a grooved tip for fast and easy loading of cylinder pins. Straight and parallel blades provide ease for rekeying locks and top-pin loading,

Pinning Tweezers are a must have for gripping the small bottom pins, top pins, drivers and lock springs.

The Locksmith tweezers are made of stainless steel that will not bend or flex, these slim tweezers can help pinning lock driver pins from inside the lock. If you need to work with locks internal components this is the perfect tool for you or any locksmith or hobbyist.

Mr. Locksmith Tweezers are:
High Quality Brushed Stainless Steel
Length for Easy Handling
Grooved Tip Design for easy grasping of pins
Ribbed Sides prevent fingers slipping
Notch is Milled to a fine edge for Grasping Thin master pins
Locksmith Tools
Locksmith Tweezers for pinning locks
Locksmith Tweezer for rekeying locks

Mr. Locksmith Tweezers

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

For further info and to purchase Bump Keys go to Mr. Locksmith Vancouver West

Bump Keys: My Grandfather was a locksmith and he called it “Rapping a Cylinder” today we call it “Bumping a Lock” with “Bump Keys.”

When bumping a lock, the key is initially inserted into the keyway the “Castration Rings” helps to keep the Bump Key one notch (pin) short of full insertion.

Bump Keys Castration Rings

Bumping the key inward forces it deeper into the keyway. The bump key transmits a slight impact force to all of the key pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.

The pin movements are highly elastic, the driver pins “jump” from the key pins for a nanosecond, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts only a nanosecond with a light rotational force or tension is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time at the shear of the pins, and the lock can be opened while the driver pins are elevated above the shear line.

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder.

Mr. Locksmith Bump Keys

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.