2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancou

2000 Hummer H1 Broken Ignition: In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

2000 Hummer H1 Broken Ignition

Mr. Locksmith™

https://mrlocksmith.com/

#mrlocksmith #locksmith #locksmithtraining

Question: Why does the GM produced H1 Hummer us a Ford 5 Cut Ignition?

H1 Hummer

The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming Kindergarten Cop in Oregon and began to campaign and lobby for a civilian version to be available on the market. In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

M998 Humvee

2000 Hummer H1 Broken Ignition. H1 Hummer 5 Cut Ford Ignition Malfunction. The Ford 5 Cut ignition failed and this is usually caused by a small piece of the buzzer jams the pins or get bunched up in the back of the ignition . In most cases it is easy to remove the broken piece, turn the ignition to the accessory position, depress the retainer pin and remove the ignition. However, somebody who did not know what they were doing, cracked the ignition and turned a simply car locksmith job into a bit of a nightmare.

Customer was happy to get back on the road. Note: H1 Hummer manufactured by GM, has a GM Diesel engine but uses a Ford 5 Cut Ignition.

Car Locksmith Service

Your automotive locksmith needs will be taken care of by our qualified locksmiths and equipped service vehicles.  We’re available to help you open your car without causing damage, make new keys or replace a car ignition.

2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancouver West

2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancouver West

If you own any of the following brands of car, truck or motorcycle, we can manufacture a new key for you: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Citroen, Daewoo, Daihatsu, Dodge, Fiat, Ford, General Motors (GMC), Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Landrover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Range Rover, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volkswagen (VW), and Volvo.  We can create keys for many other makes as well! Just give us a call and talk to one of our professional locksmiths. Are you wanting to have a transponder key duplicated?  Our expert locksmiths can help you!  Even high security keys for Mercedes-Benz, BMW, etc. are not a problem in most situations.  Limitations do apply, but contact us and we will let you know if we can help!  Our licensed locksmiths can save you money by repairing flip keys as well!

Contact us today to have an experienced locksmith help you with your automotive locksmith situation!

Mr. Locksmith™ Vancouver West

email: [email protected]

H1 Hummer | Mr. Locksmith Vancouver West

H1 Hummer | Mr. Locksmith Vancouver West

M998 Humvee, 2000 Hummer H1, 2000 H1 Hummer, Hummer H1, H1 Hummer, Hummer, Ford 5 Cut Ignition, AM General, AM General Hummer,

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKShttps://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith Vancouver West(604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ Vancouver West email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching!

 

Mr. Locksmith™ YouTube Membership Channel

Mr Locksmith YouTube Membership Channel:

Mr Locksmith Membership Channel | Mr. Locksmith™

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS:

https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Note: Videos are just being uploaded now. Lots of new content hourly and daily.

I am very excited to announce I have decided to have a YouTube membership site. So on our Locksmith channel here, I am going to put more detailed information that I do not generally put for the general public. There will be different bypass methods, I don’t publicly put up on the public channel. There will be drilling techniques. Also, the exact spots to drill, safes, and the locks, to quickly open them.

Price is $5 to $100 per month I am going to have a lot of videos that will not be on the public Channel. There will be more in-depth on a lot of our videos. Furthermore, I will have an Automotive Locksmith Members area, locksmithing Members area, Locksmith Course / Training Members. Platinum Members area covering the Locksmith Business, The Locksmith Business videos I like to do more in-depth information.

Also, I will have a Members Level of safe videos on where to drill them in different bypass methods. The Car Locksmith Members level is going to be really exciting! Many of these videos will not be on the Public YouTube channel. They will be only on the Membership Channel. I will post a lot of videos that would eventually will go onto the public site but the videos will be posted to the Membership Channel first. I am looking forward to the new Membership Channel and it will be lots of fun.

Mr. Locksmith™

Terry Whin-Yates

email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

 

#mrlocksmith #locksmithtraining #mrlocksmithmembership

Mr Locksmith Membership Channel

Mr Locksmith Membership Channel

Youtube Locksmith, Mr. Locksmith YouTube Locksmith, Terry Whin-Yates, Locksmith Training videos, Locksmith training Kit, Locksmith training online, locksmith training Canada, locksmith training USA, What is the best locksmith training course, How to Become a Locksmith,

 

How to open a beer bottle with a Door Strike – Mr. Locksmith Vancouver West

How to open a beer bottle with a Door Strike: Sometimes, when we’re at the house, camping or wherever, we have these extra door strikes that seem to not get used at all anymore. Do not worry about them anymore because a spare door strike can actually be used to open a beer bottle! That’s right. It can be used as a beer bottle opener and it seems to be a perfect fit. Here’s how:

@mr.locksmithHow to open a beer bottle with a Door Strike! ##mrlocksmith ##locksmith ##locksmiths ##locksmithservice ##locksmithing ##locksmithguy ##locksmithservices♬ original sound – Mr. Locksmith

Mr. Locksmith Vancouver West (604) 760-7620

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

How to Open a Beer Bottle Using a Door Strike

How to Open a Beer Bottle Using a Door Strike

How to Open a Beer Bottle Using a Door Strike

How to Open a Beer Bottle Using a Door Strike

 

Hands-On Locksmith Class Langley | Canada 2021

Hands-On Locksmith Class Langley BC | Canada September 2021: The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

Mr. Locksmith Training Website

Hands-on Locksmith Training Langley | Mr. Locksmith

Call or TEXT Terry Whin-Yates at 1-604-773-5625   email[email protected]

Note: Camping August 01-15, 2021 maybe a little bit difficult to talk with me but leave a text message or email and I will return your call when I have a signal.

To Sign-up for The 4 Day Hands-on  Locksmith Langley class go to Mr. Locksmith Training.

4 Days Hands-on Locksmith Training: LANGLEY BC.

LANGLEY, British Columbia Canada

  • September 6-9, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • September 13-16, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • September 20-23, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • October 4-7, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada

More Cities SOON!

Become a Locksmith

The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

  • Lock Picking
  • Rekeying Locks
  • Master-keying
  • Padlocks
  • Key Blank Identification
  • Duplicating and Cutting Keys by Code
  • How to open malfunctioning locks
  • How to open vandalized locks
  • Bypass Techniques
  • Stand Alone Access Control
  • Lock type identification, installation and service
  • Padlocks (rekey and how to open locked padlocks)
  • High Security Locks
  • Hands-On Locksmith Class Langley
  • Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

Real hands-on locksmith class designed to teach beginner Locksmiths, engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Our Mr. Locksmith Professional Locksmith state-of-the-art training provides hands-on comprehensive knowledge about locking and unlocking principles, security issues, and effective use of cutting-edge products.

Locksmith Training

During the 4 Day Hands-On Locksmith Class taught by Terry Whin-Yates each student will cut over 25+ keys per student (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Learn the two most popular methods of picking locks and my own technique that I have developed over the past 35 years to pick open locks.

There are many advantages to having a professionally trained Institutional locksmith on staff.  Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced.  Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities.  This will also provide significant cost savings over calling a contract locksmith.  This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in-house.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Bringing your locksmithing in-house will save you time, money and provide better security.

To Sign-up for The 4 Day Hands-on  Locksmith Langley class go to Mr. Locksmith Training.

How To Pick Locks – Online Course

Regularly $397 – NOW ONLY $97 US

Starts September 6, 2021 (Zoom & On-Line) 

To Sigh-up for the Online “How to Pick Locks” go to Mr. Locksmith Training “How to Pick Locks”

Locksmith Pick Gun

Locksmith Pick Gun

Become an Automotive Locksmith

On Certificate in Automotive Locksmithing
2,500.00$USD 1,500.00$USD

On-Line Automotive Locksmith Training
  • Code Machines to make car keys
  • Vehicle codes and making keys
  • Transponder Keys, Duplication, Cloning and Programming
  • How to Make Keys to Ford, Chrysler, Toyota and Honda
  • How to Make Key to GMs
  • How to Make Keys to Japanese cars and Trucks
  • How to Make Keys to Korean Cars
  • How to Make Keys to Motorcycles
  • Ford Focus Ignition
  • Ford Focus Ignition – $49.95
  • Repair Honda Ignition – $49.95
  • How to open cars – $395.00
  • All the videos on how to rekey the car locks
  • Programming Tools
  • Clone Car Key
  • Special Automotive Lock Picks (Lishi, etc.)
  • Keys Locked in Truck
  • Protecting Service Trucks (Alarm to Hockey Puck Locks)
  • Introduction to Advertising Your Automotive Business
  • Zoom Conferencing every two weeks or by appointment

Exam: Optional On-line exam is 200 questions.-Line Institutional Locksmith Class

Online Institutional Locksmith Class

On-line and Zoom Institutional Locksmith Class (Starting September 6, 2021)

To Sign-up for The Certificate in Institutional Locksmith go to Mr. Locksmith Training.

12 – 24 Months Institutional On-Line Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, etc.).

Mr. Locksmith Certificate

Our Mr. Locksmith Professional Locksmith state-of-the-art training provides hands-on comprehensive knowledge about locking and unlocking principles, security issues, and effective use of cutting-edge products.

There are many advantages to having a professionally trained Institutional locksmith on staff.  Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced.  Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities.  This will also provide a significant cost savings over calling a contract locksmith.  This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in house.

Bringing your locksmithing in-house will save you time, money and provide better security.

The training in this Institutional Locksmith course will provide you with the skills necessary to become a more efficient and competent technician who can service, install, troubleshoot and masterkey, industrial lock systems.

This On-Line and Hands-on Institutional Locksmith Training gives you the opportunity to have professionally trained Locksmith’s on your property daily. This saves you money, time, secures your facilities, resolves security issues, gives you the first line of defense and improves your Facility Management.  This program was designed for the beginner as well as the experienced locksmith. We take you from the first steps in locksmithing to advanced locksmithing.

Complete Series: Includes all Introduction to On-Line Institutional Locksmith Training and an added Bonus the Consumer Safe Series (Sentry Safes, First Alert Safes, Hotel Safes, etc.) and Institutional Safes.

  • Rekeying Locks
  • Master-keying
  • Key Control
  • Institutional Software for Key and Lock Control
  • High Security Locks
  • Emergency Lock Down Procedures
  • Emergency Lock Down Locks and Doors
  • Servicing Panic Hardware
  • Padlocks
  • Key Blank Idenfication
  • Duplicating and Cutting Keys by Code
  • How to open malfunctioning locks
  • How to open vandalized locks
  • Bypass Techniques
  • Stand Alone Access Control
  • Integrated Access Control
  • Panic Hardware
  • Door Closers
  • Securing High Risk Areas
  • Lock type identification, installation and service
  • ANSI/BHMA standards
  • Padlocks (regular to High Security)
  • Safes
  • Suppliers
  • Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

* Help with key control and master keying issues
* Help with technical information
* Help locating parts, supplies, key codes, etc.
* Help communicating internal needs to their institution.
* Help with electronic or access control issues.

Duties of an Institutional Locksmith

Duties of an Institutional Locksmith include installing, adjusting and repairing locks, making keys, and changing lock combinations. Locksmiths work on residential, automotive, commercial and institutional lock sets and door hardware. Locksmiths may also install and maintain more sophisticated security systems.

In general, the duties of an Institutional Locksmith include:

  • servicing and installing high-security lock systems and key control systems, window bars, deadlocks, and keyless entry locks
  • repairing, replacing, or adjusting damaged or defective components of an entrance or exit door, including door closers, hinges, electric release mechanisms and sometimes the door itself
  • changing lock key combinations by inserting new pins into locks
  • designing complex master key systems for industry, governments, and institutions

Institutional Locksmith Working Conditions

Usually, Institutional Locksmiths work a five-day week but maybe on-call nights and weekends to respond to emergencies. Some Institutional Locksmiths are may be required to work longer hours and have clerical duties related to running and maintaining larger facilities. Some Institutional Locksmith shops, especially mobile units, maybe small and crowded, requiring Institutional Locksmiths to work around benches, counters and stock. They sometimes are required to work in awkward or confined spaces. Those working in mobile units may be required to work in adverse weather conditions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

Hands-On Locksmith Class

Hands-On Locksmith Class

Hands-On Locksmith Class

How to Pick Locks: Hands-On Locksmith Class

How to Pick Locks: Hands-On Locksmith Class

Lab Wedge Pin Kit. Great for the Locksmith Shop or Service Truck

Lab Wedge Pin Kit. Great for the Locksmith Shop or Service Truck

Hands-on Locksmith Training Dates and Cities near you for Beginners,

Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training https://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Lock Picks & Tension Wrenches

Lock Picks & Tension Wrenches

Terry Whin-Yates safe opening

Terry Whin-Yates safe opening

Keyless Door Lock Vancouver West

Keyless Door Lock Vancouver West

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.


More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

 

Mr. Locksmith Abbotsford For Sale

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.


More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys


Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

 

Mr. Locksmith Abbotsford For Sale

I Bought the Wrong Inverter | Mr. Locksmith™ Vancouver West

I Bought the Wrong Inverter | Mr. Locksmith™ Vancouver West

Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I bought the wrong inverter. I wanted to be able to put it in my service truck or my camper or whatever, but this is for my service truck. So I wanted to be able to take 12 volts from the battery and be able to plug in 110 key machines. Now, in theory, this is a great deal. This was on sale for like $100, it is a 12 volt to 110 volt Modified sine wave 2,000-watt inverter, it’s more than I need, it’s going be perfect for my key machines. So I thought. I’m not an expert on inverters but the first thing I learned is there are actually two types: Modified Sine Wave and Pure Sine Wave

That will be great for the key machines. However, this is a modified sine and what I need is the pure or the regular Sine Wave. So the problem you’ll run across between the regular wave which is considered clean, and this modified one which is squared off is the modified wave is not good for if you are running computers. So it’s not as clean. That’s why they’re really inexpensive. It is going to cost me two, three, four times more money for getting the proper one I want. And the reason I am not going to use this one, it will do the trick for the basic duplicator key machines, however my Miracle A9S and also my ITL are code machines and they run circuit boards, they are like mini little computers on there. I am going to have to take it back now, it’s really really good but it’s a Modified Wave and I can’t use this on my computer key machines. I’m risking problems. I could be wrong, I am not going to take a chance, I will go out there and get the proper one for my locksmith service truck.

 


Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

I Bought the Wrong Inverter

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Vancouver West (604) 760-7620

Bike Lock vs Cordless Grinder Mr. Locksmith

Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

For further information go to Mr. Locksmith Vancouver West 

Unbagging Lock Tech GM Ignition Removal

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith Victoria

Victoria Locksmith Main: (250) 999-8990

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training 

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

About Terry Whin-Yates

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithvancouver.com/about-terry-whin-yates/

 

2019 Las Vegas Locksmith Training

All Hands-On Locksmith Training NOW FREE for new students
Have you ever wanted to know how to pick locks from a master locksmith? Looking for a career change or to advance your skills as a locksmith? We’ll teach you everything you need to know to be a successful locksmith.All of our hands-on locksmith training classes are included with an 18-month membership to our online courses.You can gain access to all you need to know for $1,500 USD.This includes ONE free hands-on locksmith training course a year.

Book your spot today!

Las Vegas Hands-On Locksmith Training

Want to join us at Club De Soleil Las Vegas for our 4-day hands-on locksmith training course? With every signup in the next 5 days, we will include a free set of premium grade lockpicks that we have manufactured.

Please contact Jonathan at [email protected] for more details.

Buy access to our online courses to obtain FREE access to our Las Vegas
hands-on classes

NOVEMBER 12-15 2018 Las Vegas Training Class

 

 2019 Las Vegas Training Dates
January 28-31, 2019 (10am – 3pm)
April 7-10, 2019 (10am – 3pm)September 16-19, 2019 (10am – 3pm)December 9-12, 2019 (10am – 3pm)

View our Las Vegas Training video 

As you probably know, we have released several training classes in Las Vegas, NV for November 2018 and many dates in 2019. Per high demand and popular request, these spots will go extremely quickly.

 

View the Las Vegas class schedule here

The online locksmith training course fee is deductible towards your licensing fee if you wish to become a part of Mr. Locksmith or Mr. ProLock.

We also have many franchise/licensing opportunities available in the USA and in Canada.

If you wish to become a franchisee/licensee, please visit this page and fill out the form here.

Franchise/licensing opportunities are available in almost every state/province. Contact Terry at 1-888-503-5003 for more information about business opportunities or email [email protected].

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool, and spiral pins. We will cover and discuss:

  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High-Security Locks
  • Tubular, Ace, etc.
  • The lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

This class free for online locksmith training students from October 14, 2018 (NEW STUDENTS ONLY).

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert: ”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Please click here for details and to purchase.
NOVEMBER 12-15 2018 Las Vegas Training Class

 2019 Las Vegas Training Dates

January 28-31, 2019 (10am – 3pm)

April 7-10, 2019 (10am – 3pm)

September 16-19, 2019 (10am – 3pm)

December 9-12, 2019 (10am – 3pm)