2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancou

2000 Hummer H1 Broken Ignition: In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

2000 Hummer H1 Broken Ignition

Mr. Locksmith™

https://mrlocksmith.com/

#mrlocksmith #locksmith #locksmithtraining

Question: Why does the GM produced H1 Hummer us a Ford 5 Cut Ignition?

H1 Hummer

The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming Kindergarten Cop in Oregon and began to campaign and lobby for a civilian version to be available on the market. In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

M998 Humvee

2000 Hummer H1 Broken Ignition. H1 Hummer 5 Cut Ford Ignition Malfunction. The Ford 5 Cut ignition failed and this is usually caused by a small piece of the buzzer jams the pins or get bunched up in the back of the ignition . In most cases it is easy to remove the broken piece, turn the ignition to the accessory position, depress the retainer pin and remove the ignition. However, somebody who did not know what they were doing, cracked the ignition and turned a simply car locksmith job into a bit of a nightmare.

Customer was happy to get back on the road. Note: H1 Hummer manufactured by GM, has a GM Diesel engine but uses a Ford 5 Cut Ignition.

Car Locksmith Service

Your automotive locksmith needs will be taken care of by our qualified locksmiths and equipped service vehicles.  We’re available to help you open your car without causing damage, make new keys or replace a car ignition.

2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancouver West

2000 Hummer H1 Broken Ignition | Mr. Locksmith Vancouver West

If you own any of the following brands of car, truck or motorcycle, we can manufacture a new key for you: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Citroen, Daewoo, Daihatsu, Dodge, Fiat, Ford, General Motors (GMC), Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Landrover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Range Rover, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volkswagen (VW), and Volvo.  We can create keys for many other makes as well! Just give us a call and talk to one of our professional locksmiths. Are you wanting to have a transponder key duplicated?  Our expert locksmiths can help you!  Even high security keys for Mercedes-Benz, BMW, etc. are not a problem in most situations.  Limitations do apply, but contact us and we will let you know if we can help!  Our licensed locksmiths can save you money by repairing flip keys as well!

Contact us today to have an experienced locksmith help you with your automotive locksmith situation!

Mr. Locksmith™ Vancouver West

email: [email protected]

H1 Hummer | Mr. Locksmith Vancouver West

H1 Hummer | Mr. Locksmith Vancouver West

M998 Humvee, 2000 Hummer H1, 2000 H1 Hummer, Hummer H1, H1 Hummer, Hummer, Ford 5 Cut Ignition, AM General, AM General Hummer,

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKShttps://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith Vancouver West(604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ Vancouver West email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching!

 

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Bike Lock vs Cordless Grinder | Mr. Locksmith™ Vancouver West

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Vancouver West (604) 760-7620

Bike Lock vs Cordless Grinder Mr. Locksmith

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

For further information go to Mr. Locksmith Vancouver West

My top 3 Screwdrivers

Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.

The Megapro set

The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.

The next one on my kit – the Hex set.

The Hex set

The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this  screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.

The other one is the Tamperproof kit.

The Tamperproof set

Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.

So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.

Mr. Locksmith Northshore

Northshore Locksmith Main: (604) 239-2111

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

 

 

About Terry Whin-Yates

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithvancouver.com/about-terry-whin-yates/

 

Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

Unbagging Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

For further information go to Mr. Locksmith Vancouver West 

Unbagging Lock Tech GM Ignition Removal

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith Victoria

Victoria Locksmith Main: (250) 999-8990

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training 

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

About Terry Whin-Yates

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithvancouver.com/about-terry-whin-yates/

 

How To Separate Rental Car Keys #1| Mr. Locksmith blog

How To Separate Rental Car Keys #1| Mr. Locksmith blog

Mr. Locksmith (604) 259-2953

For further information go to Mr. Locksmith Delta.

When you rent a car you usually give you two car keys/fobs crimped together on a metal wire. If you lose the keys you could be liable to replace not one but two keys and it could cost you $250-$700.

When I travel I usually have no tools, my Leather Man or Swiss Army knife (AirPort Security). A very simple method for breaking the crimped key chain wire is to just twist the two keys clockwise until either the cable or the crimp breaks.

Liked this video? Like, Share and Subscribe to Mr. Locksmith on YouTube.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

Salvador Dali’s Woman Aflame Sculpture | Mr. Locksmith

Salvador Dali Woman Aflame Sculpture | Mr. Locksmith

Mr. Locksmith Northshore (604) 239-2111

For further information go to Mr. Locksmith. Mr. Locksmith Vancouver 604-239-0882

The Chali-Rosso Art Gallery on Saturday unveiled a $2.5 million Salvador Dali sculpture called Woman Aflame in downtown Vancouver.

The nearly four-metre tall bronze sculpture will be exhibited at the corner of West Hastings and Hornby Street until Sept. 1.

Dali was a prominent Spanish surrealist who created an expansive and multimedia collection that included paintings, film, sculpture, and photography. He died in 1989.

This sculpture unites two of Dalí’s obsessions: fire, and a female figure with drawers.  The flames seem to have a life of their own, and represent the hidden intensity of unconscious desire, while the drawers represent the mystery of hidden secrets.  This beautiful faceless woman symbolizes all women.  For Dali, a woman’s mystery is her true beauty

Dali Woman Aflame Mr. Locksmith in Vancouver

Dali Woman Aflame Mr. Locksmith in Vancouver

 

 

 

 

 

 

 

 

 

 

 

Dali Woman Aflame Mr. Locksmith

Dali Woman Aflame Mr. Locksmith in Vancouver

 

 

 

 

 

 

 

 

 

 

Dali Woman Aflame Mr. Locksmith

 

 

 

 

 

 

 

 

 

Mr. Locksmith Vancouver 604-239-0882

Why choose Mr. Locksmith Vancouver?

Locked Out? Need Keys? If you need a lock change or a lock re-key?

Mr. Locksmith Vancouver is here to help when you have a home security issue. We are here to help.

We are your 24 hour emergency locksmith. Whether you just need new keys, or need a new high security lock installed, we have you covered.

Our locksmiths are licensed, bonded and insured.

There’s no such thing as a $15 locksmith.

Need professional locksmith advice? Call Mr. Locksmith Vancouver now and book your appointment.

Need your lock re-keyed or need house lockout services in Vancouver? We’re here for you!

Call 24 Hour Mr. Locksmith Vancouver whenever you need locksmith service. We are available 24 hours a day!

Our services include:

  • Lock change services
  • Home unlock services
  • 24 Hour locksmith service
    Lock rekey services
  • Master key systems
  • Lock repair
  • Mailbox keys
  • High security lock installation
  • Safes
  • Mr. Locksmith Key Store

And much more!

We cover every corner of Vancouver with locksmith services. If you have an issue with your locks or keys, don’t wait any longer and call Mr. Locksmith Vancouver or book your appointment online now.

Mr. Locksmith Vancouver (604)239-0882

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training 

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Mr. Locksmith Welcomes Randall Bath to New Westminster and Delta!

Mr. Locksmith Welcomes Randall Bath to New Westminster and Delta!

For further information go to our Mr. Locksmith Vancouver West

Randy has been with Mr. Locksmith as a fully qualified locksmith for almost 10 years now and is now the new Mr. Locksmith Franchisee for New Westminster, Delta, North Delta, Annacis Island and Ladner. Randy is also an Automotive Locksmith and a Licensed Auto Mechanic. Randy is an Authorized Abloy Protec 2 Dealer, Schlage Primus and other High Security Locks.

Randy Bath
Your New Westminster Locksmith and Automotive Locksmith

 

Again, Congratulations to Randall (Randy) Bath.

Randy at Mr. Locksmith New Westminster provides emergency locksmithing services for residential, commercial and automotive. Our fully qualified, licensed and insured locksmiths in New Westminster are available 24/7/365.

We offer the following services:

  • MASTER KEYS
  • CARD ACCESS
  • KEYLESS ENTRY
  • HIGH-SECURITY LOCKS
  • KEY CONTROL
  • SURVEILLANCE CAMERAS
  • DESK OR CABINET LOCKS
  • DOOR CLOSERS AND DOOR REPAIR OR REPLACEMENT
  • BREAK IN REPAIR
  • New Westminster Locksmith
  • AUTOMOTIVE LOCKOUT
  • ANTI-THEFT CHIP AND SMART KEYS
  • LASER CUT KEYS
  • REMOTES / KEYLESS ENTRY
  • PROX AND FOB KEYS
  • PUSH TO START
  • LOST KEYS REPLACEMENT
  • LOCK AND IGNITION REPAIR
  • DELTA LOCKSMITH
  • LOCK REPLACEMENT AND REKEYING
    • LOCKS CHANGED
    • DEADBOLTS INSTALLED
    • HIGH-SECURITY LOCKS
    • WINDOW AND SLIDING GLASS DOORS
    • HOME AND APT. ALARMS
    • GUN SAFES
    • BREAK IN REPAIR
    • VIDEO SURVEILLANCE
    • KEYLESS ENTRY
  • NEW & USED
  • LOCKED SAFES OPENED
  • COMBOS CHANGED
  • ANY SIZE SAFE MOVING
  • RENTALS
  • WE BUY USED SAFES
  • TL RATED JEWELRY SAFES
  • DEPOSITORY AND CASH MANAGEMENT SAFES
  • BIOMETRIC AND ELECTRONIC SAFES

And much more!
 We cover every corner of New Westminster Locksmith and Annacis Island  Locksmith– New Westminster with locksmith services. If you have an issue with your locks or keys, don’t wait any longer and call Mr. Locksmith New Westminster or book your appointment online now.

Mr. Locksmith New Westminster Call Randy 604-259-2522

 

Terry Whin-Yates is the Founder, President and CEO of Mr. Locksmith and is proud to have known Randall Bath for 35+ years

 

Locksmith Fast Facts Auto Book | Mr. Locksmith Vancouver West

Locksmith Fast Facts Auto Book | Mr. Locksmith Vancouver West

For further information go to Mr. Locksmith Vancouver West

Fast Facts Auto Book

 

One of my go-to books for making keys to cars and motorcycles is “2015 Edition FAST FACTS — 1965-2015 Auto’s and Cycles” by Robert G Sieveking from Sieveking Products Company. This is a great book. This is the 2015 version. Every two years, a new updated version comes out.

This is my go-to fast book when I’m talking to customers when I’m going out to the job, it has most if not all of the domestic automotive, five-ton trucks, highway trucks, and it also has extensive motorcycles. This is a fantastic book, I highly recommend it.

The “Helps Section” gives pointers and many specific transponder programming procedures that have been tested and proven in actual use. GM VATS system information, key progressions and special notes on a number of autos give you the benefit of nearly 40 years of “on the road” experience. The motorcycle index is the largest listing of 2-wheeled vehicles anywhere.

Fast Facts™ is the premier Locksmiths reference to foreign & domestic auto and motorcycle keys. Fast Facts™ is an encyclopedic listing of cars and motorcycles found in the North American Market from 1965 to present. In its 11th Edition (2010-15) the fast Facts™ book is a “Must-Have” item for all locksmiths that make keys for autos and motorcycles. Much expanded for 2015. There are now over 200 motorcycle key plates and 638 auto key plates. Many new or changed transponder Facts. The Index lists 3761 autos and over 1400 motorcycles.
Exclusive “Lay Flat” plastic spiral bound Desk Size is easier to use. When open, the book will not close like perfect bound books will do.
Fast Facts™ presents a Clear, Concise and Fully Indexed key making guide for autos and motorcycles. The NEW expanded motorcycle model index lists over 1400 motorcycle models, plus an additional 15 pages of Chinese and Korean motorcycles, scooters and handicap electric motorized chairs. Everything is at your fingertips. Fast Facts™ is clearly illustrated and fully indexed. Fast Facts contains more information than any other publication of its kind.

I hoped you enjoyed watching this video. Subscribe to my YouTube channel.

 

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Whistler (604) 670-1101 or email [email protected]

Mr. Locksmith Vancouver West

Vancouver West Locksmith Main: (604) 760-7620

Downtown Vancouver Keystore: (604) 669-8008

Downtown Vancouver Locksmith: (604) 262-1907

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

 

Mr. Locksmith MVP PRO Auto Key Programmer Review | Mr. Locksmith Vancouver West

Mr. Locksmith MVP PRO Auto Key Programmer Review | Mr. Locksmith Vancouver West

For further information go to Mr. Locksmith Vancouver West

Mr. Locksmith MVP Pro Auto Key Programmer

 

My daily Auto Key Programmer is the HotWire and the MVP PRO Auto Key Programmer. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our MVP PRO Auto Key Programmer and other existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

 

Off Shore Auto Key Programmer Clones | Mr. Locksmith Blog

Off Shore Auto Key Programmer Clones | Mr. Locksmith Blog

For further information go to Mr. Locksmith Vancouver West

Off Shore Auto Key Programmer Clones

 

My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore Auto Key Programmer Clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore Auto Key Programmer clones will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmer clones they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

Subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith Vancouver Weset

Mr. Locksmith Vancouver West: (604)760-7620

Downtown Vancouver Keystore: (604) 669-8008

Downtown Vancouver Locksmith: (604) 262-1907

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/