How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Vancouver West

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Vancouver West: (604) 760-7620

Automotive Locksmith Vancouver: (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.

 

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Is it Cheaper to Rekey or Replace Locks? | Mr. Locksmith™ Vancouver West

Is it Cheaper to Rekey or Replace Locks? | Mr Locksmith Vancouver West

www.mrlocksmithvancouverwest.com

Mr. Locksmith Vancouver West: (604) 760-7620

Cheaper to Rekey or Replace Locks

Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Every day I get asked should I rekey my locks or replace them? Re-keying your locks, if you have good locks, it’s pretty inexpensive. We just re-key the lock so the old key doesn’t fit it. So we take the lock off, re-key it, put it in, give you brand new keys. The old key will go in the lock but it won’t turn the lock. That’s re-keying. So re-keying is usually less expensive. So most locks can be re-keyed. Residential, business, commercial, everything. Most locks can be re-keyed. Residential and commercial locks The deadbolts and the key in knobs. We can re-key them. We can change the combination inside and give you new keys. If you have a good lock and it’s less expensive than replacing them. However, if you have some old, crappy locks or inexpensive or you want to increase the security of your locks, then we will replace the lock and sell you a new one and install it.

Rekey Locks

Re-keying is simple. It’s very fast. It doesn’t take long for us to do it. And we can re-key regular locks, high-security locks, some padlocks can be re-keyed but most can’t, they’re sealed units. Re-keying your locks is pretty inexpensive compared to replacing them. Also, it doesn’t take a lot of time, 15 minutes we can re-key a basic lock. Sometimes they take a little bit longer, sometimes quicker. Just depends upon the lock and how old it is and what style of lock it is. Some of the high security locks can take quite a while to re-key. But again, it’s less expensive. You don’t have to change your locks. You don’t have to install brand new ones. We can just re-key your existing locks.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

cheaper-to-rekey-or-replace-lock-vancouver-west

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

cheaper-to-rekey-or-replace-lock-vancouver-west

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Vancouver West

How to Open a Frozen Lock | Mr. Locksmith™ Vancouver West

How to Open a Frozen Lock | Mr. Locksmith Vancouver West

https://www.mrlocksmithvancouverwest.com/

Mr. Locksmith Vancouver West: (604) 760-7620

How to Open a Frozen Lock Vancouver West: The most common cause of the locks being frozen if people have washed their car so that the whole door’s frozen.

The Polar Vortex is causing below freezing temperatures and winter storms across Canada and the US. Winter storms can bring cold temperatures, power failures and frozen locks.

The easiest, quickest way is you get some windshield lock de-icer or this is windshield and window de-icer. You can make your own. Basically, it is isopropyl alcohol aka rubbing alcohol. Just spray the whole sides of the car door. Spray the lock. Spray the sides. Spray all over. It is not going to hurt the car. Stinky, yes. Be careful it is extremely flammable. Just let it seep into the door cracks, handle and lock. You can change the bottle to it to a stream but get it right in there. Get it on everything, and then you can get the door open. You can make your own lock de-icer, as well as your windshield de-icer. For your lock de-icer just use this rubbing alcohol. This one is 91% isopropyl alcohol. This is great just for raw, lock de-icer. If you want to make some windshield de-icer, it works fantastic. Use two-thirds of the high-quality rubbing alcohol with one-third water. If you’re at home get your hairdryer. Plug it in. There are some 12-volt hair dryers. At home just plug it into an extension cord. Get the hairdryer going. You’re going to blow hot air all down the sides. This is another handy method. If you don’t have the lock de-icer, the windshield de-icer, get a hairdryer. Put an extension cord on it. Just sit there and just heat up the whole door, all the edges, all everything, as well as the lock. This works pretty well. Takes some time, but it works great. So I hope this has been of help to unfreeze your frozen car door or frozen lock you are locked out.

Frozen Do0r Locks? Call Mr. Locksmith Automotive

Frozen Hockey Puck Lock

Hockey Pucks locks are great for protecting your service truck or locksmith vehicle from Break and Enter attempts. However, in the winter the Hockey Pucks locks on your Locksmith Van or service truck ice up and the locks become frozen while driving in the snow or slush. Prevention is the number one so use WD-40 and spray the heck out of it. WD-40 is a penetrating oil, but it is also water displacement fluid. If your Hockey Puck lock t is iced up give it a few hits first with a rubber hammer then take your lock deicer. Eighty percent or more isopropyl alcohol is the best. Take the lock deicer, get it right in the keyhole, spread it all over it, and that should work where our key will now be able to go in and open it up. Prevention’s the best bet. Give the lock and keyway lots of WD-40, and it works really well to prevent the lock from freezing. On my own Mr. Locksmith service truck I don’t mind using a butane lighter blowtorch. Just give the blowtorch a little twist, push and click and you get a nice hot flame. Just heat the hockey puck lock right up. Again, I wouldn’t do this on a customer’s. This is my own locksmith service truck. This will get the all unfrozen. And be careful, the lock can get really, really hot. The other way is to get a lighter, match, etc. to heat the lock or keyway. I have this little propane torch. Just heat your key up it doesn’t take long. Heat it up, and then you can start putting it into the lock. Another method to unfreeze the lock if you have nothing just heat the key with your hand, hold it in your hand, get it all heated up. It takes a long time, but if you have nothing, just use your hand. So again, if you have absolutely nothing, heat it with your hand. Just hold it in your hand, heat it up.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

How-to-Open-Frozen-Lock-vancouver-west

How to Open Frozen Lock Vancouver West

How-to-Open-Frozen-Lock-vancouver-west

How to Open Frozen Lock Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Frozen-Hockey-Puck-Lock-vancouver-west

Frozen Hockey Puck Lock Vancouver West

HOW TO OPEN FROZEN LOCK WEST VANCOUVER

How to Open Frozen Lock Vancouver West

Mr. Locksmith Richmond For Sale

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Locksmith Richmond For Sale: Hi, I’m Terry from Mr. LockSmith. I am looking for a Licensee for Mr. LockSmith Richmond, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer. More importantly, the training program teaches you how to become a businessperson.

Mr. Locksmith™ Richmond

Become a Locksmith

How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson. The training keeps care of that.

Locksmith Marketing

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a new owner.

Bump-Keys-Castration-Rings

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life.

I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. Locksmith Richmond BC.

Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Richmond.

Call Terry at Mr. Locksmith Richmond Call (604) 239-2103 or email [email protected]

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith experience and has a BA (Hons) from Simon Fraser University.

 

Mr.-Locksmith-Richmond-For-Sale-Call-604-239-2103

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

 

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

How To Cut A Kwikset Key Triton Key Machine: The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, tibbe (6 and 8-cut) and tubular. Custom search functions include the ability to search by vehicle model, keyway or IC card number. In this video, we cut a Kwikset Key (ilco KW1 Key Blank). Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

The Triton code machine is a high-security code machine. So I’ve been using this machine for a couple of weeks now, so far happy with it. First of all, this only, the screen only comes up so far and I can see people yanking at this, I just leave it down, unless I am videoing. The interesting thing is whether this is up or down, it will still cut. So, which is great for me because I don’t have to jerry-rig anything to video. So, but it is a safety feature, this will still cut with this open. Which I don’t have a problem with, but we have to think of the stupid people out there. And can it cut a Kwikset key? Here’s a Kwikset series. I can check my KW1 blank, my key blanks right here listed under key blanks, ESP KW1, go through all my numbers all the different manufacturers, we have ilco there. It’s got all the main ones. The menu displays which jaw I got it on. It says this one should be on a B. Says it has to be cut on a B. Let’s put the key in and that’s a shoulder, check. So I have t it set up to B and I put my input. So I going to cut this. Let’s just cut it as a two, one, three, four, two and it takes it. Then I go okay, I press cut and we will go look at the screen. Now here are my options. So there’s laser-cut, which I don’t like. I like the look of the traditional key. Make sure it is on that. It’s all set up properly and press cut. Okay, now we have a Kwikset key.

Now, one thing when you are cutting the keys the machine needs a metal key brass, metal, etc. I guess because when it is setting up it must put a little bit of a charge. Do not use composite keys, no plastic keys. You will probably  risk damaging the machine and I can see that, cause I think it must have some little sensor in there a little bit of electricity or something like it as it is going on there The instructions state “do not use composite keys.” No plastic keys, 3D printed key blanks, etc.  I do not know the exact reason but I imagine it is because it must put out a small electrical charge. I guess aluminum keys would be okay because aluminum is a  conductor of electricity Brass Key blanks of course and the metal keys and all our other different alloys but nothing that are plastic or composite key blanks. I hope you enjoyed watching this video.

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual.

The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Triton Key Machines Features:

  • A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.
  • Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
  • Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
  • Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
  • A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
  • A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
  • 2-year warranty which protects against all machine failures that result from flaws in manufacturing.
How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

 

List of recommended & replacement accessories:

  • TRJ2 Single-Sided Jaw (residential, commercial and single-sided automotive)
  • TRJ3 Tubular Jaw (decode and cut tubular keys)
  • TRJ4 Tibbe Jaw (decode and cut tibbe keys)
  • TRJ5 Engraving Jaw (customize customer keys with your logo or help them stay organized with key labels)
  • TRC4 Engraving Cutter
  • TRC3A Sharp Dimple Cutter
  • TRC3B Shallow Dimple Cutter
  • TRD2 Dimple Decoder
  • TRC1 2.0 Standard Replacement Cutter
  • TRC2 1.9mm Cutter
  • TRD1 Standard Replacement Decoder
  • TBD1 Mounting Kit
  • TRA4 12-Volt Vehicle Power Adapter (fully power your Triton with nothing more than than a vehicle cigarette lighter)

So stand by for more videos, it is going to be interesting.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

 

How To Cut A Kwikset Key Triton Key Machine

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, How to Cut a KW1 on a Triton Key Machine, Decode KW1 Key, Cut KW1 Key, 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Vancouver: (604) 760-7620

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West

How To Fix a Sticky Lock Vancouver West

How To Fix a Sticky Lock Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

For further information go to https://mrlocksmithvancouverwest.com/

If you have a sticky lock, whether it’s on your house, your business, a padlock, or your car door, a car ignition is different, if you have a sticky lock, there is a couple of solutions you can do.

Never, never put oil, or linseed oil, or motor oil, or sewing machine oil, or even graphite. Graphite, do not put that into your lock. Now, WD-40 is penetrating oil. It’s fantastic for getting a sticky lock unstuck but is not a lubricant.

My favorite for a lock is Tri-Flow, just love this stuff. Put a little spray, it does not take a lot, just put a little spray into your lock and it will be fantastic. Or now you know Lock Saver, there’s Houdini. I don’t have any Houdini handy, but this is my go-to is Tri-Flow. So again, WD-40 for sticky locks. It will unstick it, but it’s not gonna lubricate it. Tri-Flow will lubricate the lock perfectly.

Do not use graphite, graphite is bad for you. It’s not good for the locks. It’s an old way of lubricating locks, don’t do it. So go to Tri-Flow. If the lubricant does not work, it could because your key is old and worn, especially on cars we find that a lot. So cutting you a brand new key to factory code, the lock usually works perfectly after that. So it could be a worn key. Your lock could be worn and the lubricant may be a temporary fix, but it is not going to fix the problem. You have an old lock on your door or the padlock’s old, it’s worn out, you need a new lock. And sometimes, especially with the Honda ignitions, the high security, sometimes the ignition needs to be, the parts, replaced, and you would need a new key because those things just seem to wear out.

How to Fix a Sticky lock Vancouver West

How to Fix a Sticky lock Vancouver West

The other issue could be that the door is sticking. So it could be the hinges are dropping, or what really happens, with the change of weather, is the latch, or the deadbolt specifically, is not lined up anymore with the hole. So I have a few more videos on how to fix that. But the way to see if it is the problem is the door frame is open the door and does the key work the lock perfectly? So if the door is open and you can turn the lock perfectly and then when you close the door and it does not lock, then the problem is with your door frame. However, if you open the door, try the key, and it’s still jammed, then the problem is your door.

Locked Out because of a Sticky Lock?

In conclusion, do not use WD-40, oil, linseed oil and do not use sewing machine oil. WD-40 is, a penetrating oil, it’s good but it is not going to lubricate your lock. Use a Lubricant that is meant for locks, Tri-Flow is my favorite. Lock Saver and Houdini are good.

If you have any recommendations, put it at the bottom. So this will help you with sticky locks.

Mr. Locksmith™

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

How to Fix a Sticky Lock Vancouver West

How to Fix a Sticky Lock Vancouver West

Rekey Old Style Weiser Locks Key in Knobs | Vancouver West

Rekey Old Style Weiser Locks Key in Knobs Vancouver West

Rekey Old Style Weiser Locks Mr. Locksmith Vancouver West (604) 760-7620

Lots of these Rekey old style Weiser Locks Key-in-Knobs still in use. Rekeying Locks

Rekey Old Style Weiser Locks Key-in-knobs where extremely popular long, long time ago, it was everywhere in North America. Nowadays we see less and less of them, but it’s still important to know how to rekey it. One of the key parts is identifying it. Basically, it could be a knob like that, different colors, it could be an orbit, circular, just different styles of the rose and how the lock comes out. Now one way of identifying it was, a lot of them have the push and turn lock. So on the inside to lock it, you just push and turn, and then when the key goes in, here, you turn the key, it just turns a little bit. It just pops it out and then the lock is unlocked.

Now one of the big problems of Rekey Old Style Weiser Key in Knobs is when this handle gets old, it just stays in, so the customer’s turning the key, and the key turns but the lock won’t come undone. That’s another issue, on how to get through that, but right now we’re just going to show you how to rekey them. So to rekey the lock is quite simple, there are just two small screws on here. Go ahead and take the knob off. Just loosen it a little bit, loosen the other one. You have to come in on an angle to get it out. I had somebody ask me once, “Do you have a screwdriver that will do this easier?” And I’m going, no, this is the way it is, unfortunately. Again, the brand name is Weiser, they never, we see a lot of Weiser locks now which are actually Kwikset locks, this was never part of Kwikset, so it only says Weiser, Weiser locks. It takes the Weiser key, in a pinch, you shouldn’t do it, but in a pinch you can use a Kwikset key, but that’s not proper. So basically the knob was just lock-in, and what always happens is that little spring in there would just wear out. Now they used to sell a kit, extra springs, but that was back in the day when you did a lot of repairs, and the people would replace the spring. So the lock is very simple. Take it out; now another way of identifying this, how to take it apart, is there are no holes anywhere, to press the retainer in to remove this cylinder, or the knob. In the back here, see how it’s springy? What we have to do to remove this, we have to hold this out, and then, you see when it was locked, the key only turns that far, to unlock the door. When we wanna rekey it, we pull out the rear post, and at basically the five o’clock, 10 to five position, and it just comes out. And you can see here we can take our bible, to put it back together again, we have our bible, we have the little slot there in the knob, so we’ll put it back at 10 to five, that’s the time I call it, hold out the little post again, and you put it in at 10 to five, and basically put it back in. Sometimes it can be sticky, but the biggest problem is just pull that out, turn it, boom. If you don’t have a key, now it gets a little bit more difficult, but again, it’s a Weiser, it’s extremely easy to pick, just pick it to that position, just pick it over, just hold the post out, pick it to the 10 to five position, and sometimes you can push on this a little bit and it will push out the cylinder. Now to rekey it is interesting. Now if you don’t have key, if you have a key you can take it apart, but if you don’t have a key you have to shim it, and again, it’s a Weiser, it’s easy to pick, easy to shim. So we got the cylinder, so to take out the plug, got the little circlip, and I love this, this is Snap-on, it lasts me forever, and if it breaks they give me a new one. Just gently, just open it up just that little bit. Insert your key, turn it slightly, I have an HPC, hollow follower, just fits on there really nice. And it’s five pins. And we have done enough rekeying videos, this one’s lucky, it’s got the, got the code on there, it’s a direct code. We can just pin it up with the lab kit, and then when you put it back in, just make sure you put it on a slight angle and just put the plug back into the cylinder. Take out the key. I am doing this for the camera, but it’s best to put it on your desk flat. I got my little Snap-on tool. Again, don’t go crazy on opening this, and just put it back on. Always test, test, test. Sounds perfect, clips on good. Now I put it in the 10 to five position. Put my bible into the little spot there. And give it a little twist to make sure that the little post has engaged the back of the lock. So again, there are some different methods, this is the simplest, pull out the post, hold it, some people put a pair of pliers on the back, turn it, now this one did come out extremely easy, let me show you a tougher one here. So that one’s really easy. Here’s another one, this is a real old one I got kicking around. Old one with a new insert. How does this one? See, this one’s not coming out so easy. So again, I’ll just push on the post a little bit, there we go. So basically I’m just pushing on that, and it just pushes it out. So this one’s a little bit more awkward and tougher. And it goes in okay. Rekey Old Style Weiser Key in Knobs. Still see them out there, and you could also see different colors and a different knob style, but again, the secret is it’s got the post on the back.

Rekey Old Wesier Key in Knob Locks

Rekey Old Wesier Key in Knob Locks Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

I hope you enjoyed watching this video, please subscribe to my channel.

Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/

Mr. Locksmith™ Near Me Kelowna BC

Mr. Locksmith Near Me Kelowna BC

Mr. Locksmith™ Kelowna (250) 900-1145

Locksmith near me in Kelowna. If you are locked out and you need keys, call Mr. Locksmith Kelowna. If you need 24-hour lockout services, house lockout, call Mr. Locksmith Kelowna. Re-key locks, lock repair, locks re-keyed, lock change, Mr. Locksmith Kelowna is there to help. You need a master key system, we can design it from scratch or we can add on to your existing master key system. You lost your keys to your mailbox? We can open your mailbox, repair it, replace it, give you brand new keys. If you’re locked out of your mailbox, we can make you new keys. Mr. Locksmith Kelowna does commercial and residential services, house lockout, lockout your keys, no problem. Key extraction, if you’ve broken the key to your house or your business, we can remove the broken key and make you brand new keys. Mr. Locksmith Kelowna, is your complete locksmithing service. We have 24-hour locksmith Kelowna service, mobile locksmith Kelowna, an emergency locksmith for Kelowna. Mr. Locksmith services all major locks and door locks for residential and commercial locks. If you’re locked out of your safe and you can’t get in, we specialize in opening safes that you can’t get open. If you’re locked out of your sentry safe, call Mr. Locksmith Kelowna, we can open that safe easily and quickly. So for a locksmith Kelowna, call Mr. Locksmith.

Locksmith near me in Kelowna. If you are locked out and you need keys, call Mr. Locksmith Kelowna. If you need 24-hour lockout services, house lockout. Re-key locks, lock repair, locks re-keyed, lock change, Mr. Locksmith Kelowna is there to help. You need a master key system, we can design it from scratch or we can add on to your existing master key system. You lost your keys to your mailbox? We can open your mailbox, repair it, replace it, give you brand new keys.

If you’re locked out of your mailbox, we can make you new keys. Mr. Locksmith Kelowna does commercial and residential services, house lockout, lockout your keys, no problem. Key extraction, if you’ve broken the key to your house or your business, we can remove the broken key and make you brand new keys. Mr. Locksmith Kelowna is your complete locksmithing service. We have 24-hour locksmith Kelowna service, mobile locksmith Kelowna BC, an emergency locksmith for Kelowna.

Mr. Locksmith services all major locks and door locks for residential and commercial locks; Abloy, Primus, Schlage, Weiser, Kwikset, Ingersoll rand, Mul-T-lock, Asymmetrical, Abloy. If you’re locked out of your safe and you can’t get in, we specialize in opening safes that you can’t get open. If you’re locked out of your sentry safe, call Mr. Locksmith Kelowna, we can open that safe easily and quickly. So for a locksmith Kelowna, call Mr. Locksmith. If you are locked out and need keys. If you need 24-hour lockout services, house lockout, car lockout, call Mr. Locksmith. Re-key locks, lock repair, locks re-keyed, lock change, Mr. Locksmith Kelowna is there to help. If you need a master key system, we can design it from scratch, or we can add on to your existing master key system. If you have lost your keys to your mailbox? We can open your mailbox, repair it, replace it, give you brand new keys. If you’re locked out of your mailbox, we can make you new keys. Mr. Locksmith Kelowna does commercial and residential services, house lockout, locked out, need keys, no problem. Key extraction, if you’ve broken the key to your house or your business, we can remove the broken key and make you brand new keys.

Locksmith Kelowna

Mr. Locksmith Kelowna

Mr. Locksmith is your complete locksmithing service. We have 24-hour locksmith service, mobile locksmith, and emergency locksmith. If you need an automotive locksmith, keys locked in your car, we are your car locksmith, keys locked inside the vehicle, or you’ve lost your keys, we can make the car key made onsite, we have a mobile automotive locksmith. Mr. Locksmith services all major locks and door locks for residential and commercial locks, Abloy, Primus, Schlage, Weiser, Kwikset, Ingersoll Rand, Mul-T-Lock, ASSA Medeco, Abloy. We specialize in opening safes that you can’t get open. If you’re locked out of your Sentry Safe, call Mr. Locksmith Kelowna, we can open that safe easily and quickly. Call Mr. Locksmith. Additional Locksmith Services: – We install new Lock Sets – High security lock & safes – Padlock – Windows lock – Safes (Fire Safe & Burglar Safes) – Bump Proof Locks – Pick Proof Locks – Mailbox locks replacement – Our fully trained locksmiths have every mailbox lock in stock at all times –It takes about 15 minutes to open and replace your wall mounted mailbox lock.

Replace Mailbox Lock Kelowna

Replace Mailbox Lock Kelowna

Mr. Locksmith™ Kelowna (250) 900-1145

Locksmith Near Me Kelowna

Locksmith Near Me Kelowna

Mr. Locksmith™ Okanagan (250) 900-1145

Mr. Locksmith Okanagan Locksmith Cities We Service:

Kelowna, Okanagan Mission, Rutland, Westbank First Nation, West Kelowna, Lakeview Heights, Westbank, Peachland, Lake Country, Carr’s Landing, Okanagan Centre, Winfield, Oyama, Summerland, Penticton, Osoyoos, Oliver and Vernon.

 

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.


More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

 

Mr. Locksmith Abbotsford For Sale