How to Replace Mazda Battery Remote Head Key Vancouver West

How to Replace Mazda Battery Remote Head Key: This is a remote head key for a Mazda 3, fits the Mazda 6, Miata and the Mx5.

Mr. Locksmith Vancouver West Automotive : (604) 259-7617

How to Replace Mazda Battery Remote Head Key

This is an interesting Mazda Key. It’s a flip key, so you hide it away. Now to get the battery is a little bit confusing. Make sure the key is flipped out.

Now you can just barely see it, there’s kind of like two little notches, would you look way down there. Now actually, my flathead is too big to get in there. Nothing else I has to do the trick. My leatherman let me down, this is the first time in a long time. This it the new toy. Basically, you can see it in there, you just sort of depress and it just pulls apart. So it’s the one closest to the ring, just a press. Again, the key has to be out, go from the end to the end, a little spot there, just give it a little depress. I bet you a paperclip would do the trick too. It doesn’t take much pressure, just little tiny bit of pressure, and it comes apart. Still more to do. Now, we have not the two outside parts, but the bottom part there is actually a little tiny arrow there, now you can take your regular flathead, and give it a little twist. And it comes apart really nice. And then there’s your battery, its’ there. Put in your flathead again. A little bit of overkill, a little bit of a twist. This is one is a, again popular.

How to Replace Mazda Battery Remote Head Key Vancouver West

How to Replace Mazda Battery Remote Head Key Vancouver West

Mazda Key Battery Replacement

The CR1620, again it’s got a little positive. Positive goes down, positive down, if you get confused there is the context. Just give it a little, just line it up, it’ll clip together. Again, I’d like to put in a good quality battery. I like the energizers or the Duracells. Those are my favorite. I don’t like the dollar store ones. I’m just gonna through this again, because again this one gets a little confusing. It’s a remote head key. Flip the key out first, if you look down the sides, as closest to there. And you need .. A paperclip would do the trick. I’m gonna use my, just depress it gently, you don’t have to go overkill here. What we’re pushing on is right there.

CR1620 Battery

CR1620 Battery

That’s all we’re really pushing on. Just to hold it in. So a paperclip would do the trick. And then the middle slot, just take your screwdriver, flathead, give it a little twist. It doesn’t take much pressure. And it just comes apart. There’s our battery CR1620. There’s a whole set up. Clip it in. Just line up our pieces. Yeah, you don’t have to force anything. Everything will just clip together nicely. If you have to force it, you’re doing something wrong. Goes together, close the other nicely. Again, here we have, is a four button Mazda remote header key. I hope this video has been a help to you.

I hope you enjoyed watching this video. Subscribe to my channel.

 

How to Replace Mazda Battery Vancouver West

Mr. Locksmith Vancouver West Automotive : (604) 259-7617

Mr. Locksmith Vancouver West: (604) 760-7620


How to Replace Nissan Key Battery

How to Replace Dodge Remote Battery

How to Replace Dodge Remote Battery

How to Replace Mazda Battery Remote Head Key

 

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Best Residential Door Lock Vancouver West

Best Residential Door Lock Vancouver West is the Schlage B60N Deadbolt. Mr. Locksmith Vancouver West. Schlage has slightly redesigned the exterior of the B60N. It keeps its ANSI/BHMA Grade 1 security rating and adds a new BHMA Residential AAA rating.

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Vancouver West (Kitsilano, UBC, Kerrisdale, etc.) : (604) 760 7620

 

Best Residential Door Lock

The Schlage B60N is essentially a residential version of a high-security deadbolt lock. It’s rated Grade 1 by ANSI/BHMA, meaning it has passed the same hammering, prying, sawing, picking, and kicking tests as the toughest high-security locks that Schlage produces. Experts told us it’s extremely difficult to lockpick the B60N—which, honestly, is not much of a concern anyway, because a Grade 1 lock like this is secure enough that a determined thief would be more likely to bypass it and find another way into the home.

Features

  • Unique Snap & Stay™ design
  • Easy installation: One-person project; no extra hands needed
  • ANSI Grade 1–professional grade security
  • Biggest adjustable bolt available
  • Pick and bump resistant
  • Best Residential Door Lock
  • Adjusts to fit all standard door preparations
  • Quality finishes for lasting beauty
  • Lifetime finish and mechanical guarantee
  • Various finishes available

Specifications

  • Deadbolt thrown or retracted by key from outside or by inside thumbturn. Bolt automatically deadlocks when fully thrown
  • Door thickness 1-3/8″ – 1-3/4″
  • Backset: 2-3/8″ – 2-3/4″
  • Throw: 9/16″
  • Strike: 1-1/8″ x 2-3/4″, round corner
  • Strike reinforcer with 3″ screws
  • Large thumbturn
  • Keyed Alike
  • Keyway: SC1 / SC4
  • Certifications:  Meets Grade 1 BHMA requirements

Also, The New York Times has rated the  Schlage B60N as the Best Residential Door lock too. Professional locksmiths are offered a choice between this Schlage model and a similarly qualified deadbolt lock from Kwikset, they unanimously vote for Schlage.

Mr. Locksmith Vancouver BC recommends the Schlage B60N is our pick as the best deadbolt for residential customers. This single-cylinder lock is affordable, widely available. Schlage is known to be a top maker of heavy duty deadbolts. It produces different models designed for various purposes. 

Best Residential Deadbolt Lock

What is the best residential deadbolt lock? It’s, this is not my opinion, My favorite Residential and Commerical deadbolt is the Schlage Locks. I really like the commercial grade. So we have a light-duty commercial, a heavy-duty commercial, and they have a residential version. And it has been rated by different magazines and articles as the best residential deadbolt. Nothing really close to this one. It’s called the Schlage B60N.

There are all sorts of different numbers that show the finish etc. So let’s just pull this apart and I’ll put it on the door and I’ll show you why this is probably the best residential lock, dollar for dollar. Now, if you know my videos, you know I love putting on the heavy-duty, the same locks I put on the hospitals and school boards and businesses, this is the heavy-duty. It’s quite solid and it’s made by the same company. So this is the Schlage B660. This is the 560, it’s a little bit lighter-duty version. And you’ve seen my videos on why I love these. These are more expensive, but they’re probably the best commercial locks. And if you look at your schools and your hospitals, this is what they’re using on most cases. Now, for residential, this is a great lock and I am going to show you what we have here. This is the B60N and let’s just see what we got here. Right off the bat, it’s a six-pin keyway. So this is the C-keyway of the SC1. So this is right off the bat, six-pin. Geez, that’s pretty good out of the box.

Lock Installation Vancouver West

Lock Installation Vancouver West

Resident, most residential are five-pin. This is a six-pin out of it. Let’s see what we got here. So this will be, now, this has an interesting bolt. Let’s pull the bolt out. The bolt is adjustable. Your most common, from the edge of the door to the center hole is either 2 3/8 or 2 3/4. And one of the biggest calls I have at nighttime or even daytime saying, “I bought a new lock and it’s too short.” Well, just, you know, read the instructions, or this one’s quite simple, just twist it. Now, occasionally we get the five-inch backsets, and that’s a topic for another video, but this is the most common, is 2 3/8 and 2 3/4. Now, what’s really good with this one, it comes with a kit. So I can change the faceplate here to fit whether it’s a drive-in, this is a rounded edge, right at the bat, it’ll do rounded edges. Square and drive-in. So I can just take off the little faceplate here and change it to whatever I have. So the drive-in is just where they just drill a round hole, you know, put it in, beveled edges. We are seeing a lot of doors come like this from the factory and the squared off. Now, this is such a simple install. Don’t throw this away. These are three inch screws go on the frame of the door. And you’re just putting these three inch screws and it really, really makes the door harder to kick in, so the frame harder to kick in. So your door usually gives way first and we have lots of videos on how to secure your doors but out of the box three inch screws, nice plate. If you put this in, it should catch the stud, make it make the frame way, way harder to kick in. So it’s got lots of options on this. So I’m quite impressed. It’s not pickable, but it’s such a good quality lock. It’s extremely, it can be difficult to pick. When we go to, if it’s a Weiser or Kwikset lock we’re laughing, we’re just gonna pick it in less than two minutes, usually, unless there’s other problems. When you come across and you see the Schlage sign on the on the lock, you’re going, ah, okay I’m gonna have to hustle.

Now the commercial grade stuff have, this uses what they call the classic key ways. So this is a C key way or an SC1. And that’s the residential versions. The commercial versions come with probably over a hundred different types of cylinders ranging from the Classic up to what they call the Everest and up to the Primus. The Primus is their high security locks that are rated, real, real ratings as pick resistance. And even the plane key that comes with it, they call the Everest, which is the C123 or the C129. Boy, those are hard to really pick. So I know we’re talking about the best residential lock. So this is the B60N and out of the box it comes with a six-pin. Now I’ve seen five-pin on these. So this is a unusual, so it’s a six-pin Schlage key way C or SC1 or Classic. Pretty simple and it’s got a spacer as well.

 

Best Residential Door Lock Installation Vancouver West

Measure from the edge of the door. You can see this, is that too short? Now we say, now I think this says on it, it says top. So we now have top. Sometimes you see Mickey Mouse ears. See the, there’s the Mickey Mouse ears, but it says top. So we know this is top, but let’s take a look at, see when this is too short, it’s not gonna go in. And this is such a common, people call us with this problem, it’s too short. So this is adjustable. Nice, quick, easy. Even says top. There’s the 2 3/4. And stay tuned to the end, I’ll show you a little bonus thing that they have. Now the other problem people have when they install these they go too crazy. They just crank these down and just, it just puts a bad twist on everything. Now, the other thing to make sure when you install your deadbolt that it always goes together perfect. This works for the good quality locks. The off shore stuff is another dog’s breakfast. When you put it on, have the bolt with the door open, of course. Have the bolt out. Then key out, don’t put the key in. The other problem people do is they put the key in. So bolt out, key out and then this goes together absolutely perfect every time. So you just put the tailpiece. Now, this is what we call it a lazy, a lazy tailpiece. See, it just turns a little bit. Don’t play with anything on here. Some of the big problems we have is people start pulling these apart. Watch other videos of how to re-key these. So the tailpiece just goes in perfect. Lock up, remember key out. The thumb turn. Now this is a single cylinder deadbolt, thumb turn will go on. And usually when this is aimed this way it’s locked. You can look at it from a distance that way it’s unlocked. So just pull it back a little bit, just put the screws in and what you usually wanna do is just start the screws. You can, these are a pretty good lock so they’re not gonna cross thread easily but just get it started, each side started. Just get it started. And then, again, we just want these snug. We don’t wanna crank them down. If you have a metal door, wood is a little bit better. Well, it’s not better it’s just a less likely to. The big problem is on some of the metal doors when you tighten these down really tight it pulls the metal in and then this will bind. So you see this as absolutely perfect. We have this, everything’s running really good. Turns nicely. And if we use the key. Check it before you lock yourself out. And it’s perfect. So, and make sure you take the key out, lock it, take the key out. Then, you know, it’s locked, lock, unlock it, take the key out. If that all works, the lock will be absolutely perfect. So why is this the best residential? The quality is light years and I’ll do a comparison in another video coming up. I’ll show you the other most, one of the most popular locks out there is the Kwikset Deadbolt. Whether you get the pin tumbler, Kwikset or the smart key you’ll see the difference in the quality. The Best Residental Door Lock for the money is the Schlage B660N

There is no comparison between the two. I like this for residential, even though I have the habit of more putting a commercial on our residential customers, this lock is a great lock for the price. It’s fantastic. It’s got the taper. It’s extremely difficult to pick or bump. I shouldn’t say extremely difficult. It’s not rated as pick-resistant. So let’s put it into reality here. Most locks are different ranges of being able to pick but this compared to a Kwikset or other locks this is gonna be way tougher to pick. And if you ask a reputable locksmith they will say, if they’re honest, that the Schlage, Schlage, Schlage are difficult to pick. It’s got a good quality, one-inch deadbolt, a good quality cylinder. Everything on this is very, very close to the commercial grade stuff. This is not gonna fall apart in five years, even 10 years, this is gonna be a good lock. One little side piece. If the lock, when it’s opened is working perfect with the key and with the lock. When you close the door, it tries it from the inside first it should just be nice and smooth like this. If it’s sticking, then you either have a strike, usually, it’s the strike is out of whack or it could be the doorframe, but usually, sometimes you may have to adjust your, on the frame you may have to adjust the strike. And if you look at my favorite locksmith tool is a bit of lipstick and you can see why. So watch that video, I’ll put a link to it, why this can help you if it’s sticking. Once everything’s perfect when the door is open, the lock is perfect. You close the door and it’s catching or it’s not locking. And I’ll show you how to fix that in our other video. Now, as a side bonus, they also have the Schlage B660 Deadbolt is in a what we call Weiser keyway or a W1. So it’s not the Kwikset keyway. So this is a thicker key than the Kwikset key or the KW1. So this is a Weiser, they call it a Falcon. And in this case they have a five-pin in here and it’s the same bolt. It’s just that the keyway is different. So they put, everything is the same except for they have a Weiser key. And I think that’s the only two versions they come in, they come in the Classic SC1 and they come in, they call it the Falcon or the, I call it the Weiser, that’s the most popular. Not popular in the US extremely popular in Canada is the Weiser keyway. So I think that’s why they sort of came out with this one. It’s okay. I’d rather have the, well, especially this, this is a six-pin real Schlage cylinder. And then we have this five-pin Weiser. I bet you that’d be extremely easy to pick. So between the two, this one’s gonna be really, gonna give us the run for the money. This one’s gonna pick in under two minutes and we’ll have other videos on that. Why is this the best residential deadbolt? It’s good. It’s good quality. It’s an extremely good lock. I like it. I would install this on anybody who wants it if they wanted a less expensive deadbolt. This is about as low as I will go. And this is extremely good quality.

Lock Replace Vancouver

I do not like installing Kwikset’s residential locks. I like Zero, the Yale, not that much better. Now we’ll do a comparison. This is the B60N. I’ll grab some more of them in the big box hardware stores. I’m gonna have a comparison, we’ll pick up a bunch of them and we’ll take a look but this is the best residential deadbolt available at the moment. Please subscribe to the video and please leave comments. We’re gonna have a new series called, ask Mr. Locksmith. Put your comments below, what you do, don’t like, what you think is better and I will respond. Sometimes I try to respond online but we’re gonna start making a video response to a lot of the questions, so it’s gonna be “Ask Mr. Locksmith” Please put your questions. I hope you enjoyed watching this video. Subscribe to my channel, also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mobile Locksmith Vancouver West

Mobile Locksmith Vancouver West

Call Mr. Locksmith Vancouver West BC

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Vancouver West Automotive : (604) 259-7617

Best Residential Door Lock

Best Residential Door Lock Vancouver West

Best Residential Door Lock Vancouver West

Unboxing Schlage B660P Deadbolt Lock | Mr. Locksmith Vancouver West

Unboxing Schlage B660P Deadbolt Lock | Mr. Locksmith Vancouver West: One of my favorite Deadbolt Locks and one of the most popular and versatile deadbolts we sell is the Schlage B660. The Schlage 66o is a Commerical Grade Deadbolt but looks fantastic on Residential Door. The Schlage Deadbolt is very versatile because we can change the cylinder to almost any Keyway, A locksmith can use it from just a simple Schlage C Keyway to the C123 to the Primus High Security Locks. Also, you can add cylinders in the most popular keyways eg: Weiser, Kwikset, Sargent, Abloys. The Schlage Deadbolt is a fantastic lock. It’s very versatile and it really cuts down on our stock.

Schlage Deadbolt Lock

This is the Schlage B660 Deadbolt. 626 is the color. And C123 is the keyway. I absolutely love this deadbolt. It’s extremely versatile and it’s a fantastic heavy-duty deadbolt that’s even good for residential and good for all commercial applications. So it’s just.. Unboxing Schlage B660P Deadbolt Lock we will put out the bits and pieces that are in here. And instructions, we don’t read the instructions. So here’s what we got. We have a nice heavy-duty deadbolt. It’s got the security collar. So we’re anti spin or whatever. It’s solid, it’s a weight, you know, it’s a very, very heavy sort of deadbolt. It’s fantastic. And we’ll get into it more later but I love that we can put almost anything into it. I absolutely love this deadbolt. We’ll get into it as we install it. But here’s the out of the box. It’s an extremely difficult lock to pick because we have.. It is a six pin, it’s extremely tight tolerances LockSmiths hate picking these things, they’re really hard. And what makes it even tougher it’s so simple, it’s got a little check pin down here. So you gotta pick it, which is hard. And then you gotta make sure you get the check pin. This version is not rated as “pick resistant” however, it is extremely difficult to pick, especially the Schlage Everest series (C123, S129, etc.) . If you want pick resistance, then we go into the Primus high security, which is similar with a lot more of.. It’s UL listed as a pick resistant, really pick resistant not some of these fake company standards. This is UL listed as a pick resistant, not this one. This is a C123, with different keyways, very versatile. Now what I really like is it has this collar on here. And the main point of it is it is ice-pick resistant. So if they try to.. This is an ice-pick shield, which is still an extremely popular method of defeating locks, is they come in from the top and they attack the top of the lock with an ice-pick. And it just goes right through the wooden door, some of the metal doors, maybe not the commercial doors but basically that is so simple. It’s in there and it protects it from ice-pick attacks. That was really good as well and we highly recommend this on your strike. This goes in the edge of the doorframe. You run the three inch screws and what these do, is they capture, they go right into the two by four. Hopefully, the doors got a two by four is framed correctly. And these three inch screws make it really hard to kick the door in. I actually preferred a longer strike, but out of the box, this is pretty good. You’ll see my other videos where I like the 18 inch long strike plate, but this in a pinch.. In a package, this is fantastic. It’s the B660, it’s very heavy duty it’s a very pick resistant Deadbolt. It’s the same lock we put on the hospitals and the schools. If you ever look at the locks of hospitals and schools, they’re usually a B660 or something around that, fantastic lock, extremely durable. I’ve seen these things 25, 30 years on. The old versions of this, my dad put in are still working. So they’re fantastic. The schools love them, and again, it’s fantastic for residential. More Unboxing Schlage B660P Deadbolt Lock and other Schlage Deadbolts will be added soon.

Mr. Locksmith Vancouver West (Kitsilano, UBC, Kerrisdale, etc.) : (604) 760 7620

Mr. Locksmith Vancouver DOWNTOWN: (604) 262-1907

Mr. Locksmith East Vancouver (604) 239-0755

Mr. Locksmith Automotive : (604) 259-7617

Best Deadbolts

The B600/700/800 Series are Schlage’s highest grade deadbolt locks. Choose the 600 for Grade 1 security in high-traffic commercial applications. Also, a perfect Deadbolt Lock for Residential Homes and Condos. Choose the 700 or 800 and get standard a Primus XP controlled access cylinder (700) or Primus XP High Security cylinder with UL 437 rating (800). A variety of functions and finishes makes the B600/700/800 Series a versatile choice for added security no matter where you use it.

Schlage Canada

 

Schlage 600 Series Deadbolt Locks

  • High-strength steel alloy deadbolt with hardened steel roller resists sawing and kick-in attacks ƒ
  • Precision-built solid brass 6-pin cylinders with phosphor bronze springs and nickel silver pins ensure long life and ƒ smooth operation ƒ
  • Tough nickel silver keys for smooth, long-lasting operation ƒ
  • Deadbolts Locks
  • Bolt has a 1″ (25 mm) throw,
  • Exclusive concealed wood frame reinforcer protects wood jamb against kick-in attacks ƒ
  • Free-spinning solid cylinder collar resists wrenching and prying ƒ
  • Large inside Americans with Disabilities Act (ADA) compliant thumb turn makes it easy to throw and retract deadbolt ƒ
  • Metal shield protects bolt from ice-pick attack through the door ƒ
  • Hardened steel ball-bearings protect mounting bolts from drill attack ƒ
  • Meets UL10B and UL10C requirements
Mr-Locksmith-reinforce-Door-with-Schlage-deadbolt-300x169-300x169

Mr. Locksmith Reinforce Door with Schlage Deadbolt

How to Rekey Deadbolt Lock

Schlage Locks can be rekeyed and Master Kekeyed

How-to-take-a-picture-of-a-Schlage

How to Take a Picture of a Key

Contact us today to have an experienced locksmith assist you with your automotive locksmith situation!

Call Us Right Away for Professional Locksmithing & Security Services in Vancouver West British Columbia!

Deadbolt Locks

 

Deadbolt-Lock-Schlage-B660

Deadbolt Lock Schlage B660

How to Remove Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Vancouver West

How to Remove a Lori Double Cylinder Deadbolt: Lori Deadbolt locks can be confusing to remove for experienced and new locksmiths too. You will need a 5/64 -inch long-shaft Allen wrench to remove the Mortice Cylinders from the lock housing. Lori deadbolts, manufactured by Ilco Industries and use mortised deadbolts available in both thumb turn and double cylinder models. Removing the Lori deadbolt to re-key or replace the lock not difficult if you have the proper Allen Wrench.

Mr. Locksmith Vancouver West: (604) 760-7620

Automotive Locksmith Vancouver: (604) 259-7617

How to Remove a Lori Double Cylinder Deadbolt

  • Open the door.
  • Remove the deadbolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  • Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  • Insert the long shaft of a 5/64-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt if it is a double cylinder deadbolt.
  • Remove the deadbolt cylinder(s) by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. Insert the deadbolt’s key halfway into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models
  • Remove the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.

 

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

Lori-Double-Cylinder-Deadbolt-vancouver-west

Lori Double Cylinder Deadbolt | Mr. Locksmith Vancouver West

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Is it Cheaper to Rekey or Replace Locks? | Mr. Locksmith™ Vancouver West

Is it Cheaper to Rekey or Replace Locks? | Mr Locksmith Vancouver West

www.mrlocksmithvancouverwest.com

Mr. Locksmith Vancouver West: (604) 760-7620

Cheaper to Rekey or Replace Locks

Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

Every day I get asked should I rekey my locks or replace them? Re-keying your locks, if you have good locks, it’s pretty inexpensive. We just re-key the lock so the old key doesn’t fit it. So we take the lock off, re-key it, put it in, give you brand new keys. The old key will go in the lock but it won’t turn the lock. That’s re-keying. So re-keying is usually less expensive. So most locks can be re-keyed. Residential, business, commercial, everything. Most locks can be re-keyed. Residential and commercial locks The deadbolts and the key in knobs. We can re-key them. We can change the combination inside and give you new keys. If you have a good lock and it’s less expensive than replacing them. However, if you have some old, crappy locks or inexpensive or you want to increase the security of your locks, then we will replace the lock and sell you a new one and install it.

Rekey Locks

Re-keying is simple. It’s very fast. It doesn’t take long for us to do it. And we can re-key regular locks, high-security locks, some padlocks can be re-keyed but most can’t, they’re sealed units. Re-keying your locks is pretty inexpensive compared to replacing them. Also, it doesn’t take a lot of time, 15 minutes we can re-key a basic lock. Sometimes they take a little bit longer, sometimes quicker. Just depends upon the lock and how old it is and what style of lock it is. Some of the high security locks can take quite a while to re-key. But again, it’s less expensive. You don’t have to change your locks. You don’t have to install brand new ones. We can just re-key your existing locks.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

cheaper-to-rekey-or-replace-lock-vancouver-west

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

cheaper-to-rekey-or-replace-lock-vancouver-west

Cheaper to Rekey or Replace Lock? | Mr. Locksmith Vancouver West

How to Open a Frozen Lock | Mr. Locksmith™ Vancouver West

How to Open a Frozen Lock | Mr. Locksmith Vancouver West

https://www.mrlocksmithvancouverwest.com/

Mr. Locksmith Vancouver West: (604) 760-7620

How to Open a Frozen Lock Vancouver West: The most common cause of the locks being frozen if people have washed their car so that the whole door’s frozen.

The Polar Vortex is causing below freezing temperatures and winter storms across Canada and the US. Winter storms can bring cold temperatures, power failures and frozen locks.

The easiest, quickest way is you get some windshield lock de-icer or this is windshield and window de-icer. You can make your own. Basically, it is isopropyl alcohol aka rubbing alcohol. Just spray the whole sides of the car door. Spray the lock. Spray the sides. Spray all over. It is not going to hurt the car. Stinky, yes. Be careful it is extremely flammable. Just let it seep into the door cracks, handle and lock. You can change the bottle to it to a stream but get it right in there. Get it on everything, and then you can get the door open. You can make your own lock de-icer, as well as your windshield de-icer. For your lock de-icer just use this rubbing alcohol. This one is 91% isopropyl alcohol. This is great just for raw, lock de-icer. If you want to make some windshield de-icer, it works fantastic. Use two-thirds of the high-quality rubbing alcohol with one-third water. If you’re at home get your hairdryer. Plug it in. There are some 12-volt hair dryers. At home just plug it into an extension cord. Get the hairdryer going. You’re going to blow hot air all down the sides. This is another handy method. If you don’t have the lock de-icer, the windshield de-icer, get a hairdryer. Put an extension cord on it. Just sit there and just heat up the whole door, all the edges, all everything, as well as the lock. This works pretty well. Takes some time, but it works great. So I hope this has been of help to unfreeze your frozen car door or frozen lock you are locked out.

Frozen Do0r Locks? Call Mr. Locksmith Automotive

Frozen Hockey Puck Lock

Hockey Pucks locks are great for protecting your service truck or locksmith vehicle from Break and Enter attempts. However, in the winter the Hockey Pucks locks on your Locksmith Van or service truck ice up and the locks become frozen while driving in the snow or slush. Prevention is the number one so use WD-40 and spray the heck out of it. WD-40 is a penetrating oil, but it is also water displacement fluid. If your Hockey Puck lock t is iced up give it a few hits first with a rubber hammer then take your lock deicer. Eighty percent or more isopropyl alcohol is the best. Take the lock deicer, get it right in the keyhole, spread it all over it, and that should work where our key will now be able to go in and open it up. Prevention’s the best bet. Give the lock and keyway lots of WD-40, and it works really well to prevent the lock from freezing. On my own Mr. Locksmith service truck I don’t mind using a butane lighter blowtorch. Just give the blowtorch a little twist, push and click and you get a nice hot flame. Just heat the hockey puck lock right up. Again, I wouldn’t do this on a customer’s. This is my own locksmith service truck. This will get the all unfrozen. And be careful, the lock can get really, really hot. The other way is to get a lighter, match, etc. to heat the lock or keyway. I have this little propane torch. Just heat your key up it doesn’t take long. Heat it up, and then you can start putting it into the lock. Another method to unfreeze the lock if you have nothing just heat the key with your hand, hold it in your hand, get it all heated up. It takes a long time, but if you have nothing, just use your hand. So again, if you have absolutely nothing, heat it with your hand. Just hold it in your hand, heat it up.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

How-to-Open-Frozen-Lock-vancouver-west

How to Open Frozen Lock Vancouver West

How-to-Open-Frozen-Lock-vancouver-west

How to Open Frozen Lock Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Frozen-Hockey-Puck-Lock-vancouver-west

Frozen Hockey Puck Lock Vancouver West

HOW TO OPEN FROZEN LOCK WEST VANCOUVER

How to Open Frozen Lock Vancouver West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

How To Cut A Kwikset Key Triton Key Machine: The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, tibbe (6 and 8-cut) and tubular. Custom search functions include the ability to search by vehicle model, keyway or IC card number. In this video, we cut a Kwikset Key (ilco KW1 Key Blank). Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

The Triton code machine is a high-security code machine. So I’ve been using this machine for a couple of weeks now, so far happy with it. First of all, this only, the screen only comes up so far and I can see people yanking at this, I just leave it down, unless I am videoing. The interesting thing is whether this is up or down, it will still cut. So, which is great for me because I don’t have to jerry-rig anything to video. So, but it is a safety feature, this will still cut with this open. Which I don’t have a problem with, but we have to think of the stupid people out there. And can it cut a Kwikset key? Here’s a Kwikset series. I can check my KW1 blank, my key blanks right here listed under key blanks, ESP KW1, go through all my numbers all the different manufacturers, we have ilco there. It’s got all the main ones. The menu displays which jaw I got it on. It says this one should be on a B. Says it has to be cut on a B. Let’s put the key in and that’s a shoulder, check. So I have t it set up to B and I put my input. So I going to cut this. Let’s just cut it as a two, one, three, four, two and it takes it. Then I go okay, I press cut and we will go look at the screen. Now here are my options. So there’s laser-cut, which I don’t like. I like the look of the traditional key. Make sure it is on that. It’s all set up properly and press cut. Okay, now we have a Kwikset key.

Now, one thing when you are cutting the keys the machine needs a metal key brass, metal, etc. I guess because when it is setting up it must put a little bit of a charge. Do not use composite keys, no plastic keys. You will probably  risk damaging the machine and I can see that, cause I think it must have some little sensor in there a little bit of electricity or something like it as it is going on there The instructions state “do not use composite keys.” No plastic keys, 3D printed key blanks, etc.  I do not know the exact reason but I imagine it is because it must put out a small electrical charge. I guess aluminum keys would be okay because aluminum is a  conductor of electricity Brass Key blanks of course and the metal keys and all our other different alloys but nothing that are plastic or composite key blanks. I hope you enjoyed watching this video.

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual.

The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Triton Key Machines Features:

  • A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.
  • Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
  • Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
  • Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
  • A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
  • A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
  • 2-year warranty which protects against all machine failures that result from flaws in manufacturing.
How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

 

List of recommended & replacement accessories:

  • TRJ2 Single-Sided Jaw (residential, commercial and single-sided automotive)
  • TRJ3 Tubular Jaw (decode and cut tubular keys)
  • TRJ4 Tibbe Jaw (decode and cut tibbe keys)
  • TRJ5 Engraving Jaw (customize customer keys with your logo or help them stay organized with key labels)
  • TRC4 Engraving Cutter
  • TRC3A Sharp Dimple Cutter
  • TRC3B Shallow Dimple Cutter
  • TRD2 Dimple Decoder
  • TRC1 2.0 Standard Replacement Cutter
  • TRC2 1.9mm Cutter
  • TRD1 Standard Replacement Decoder
  • TBD1 Mounting Kit
  • TRA4 12-Volt Vehicle Power Adapter (fully power your Triton with nothing more than than a vehicle cigarette lighter)

So stand by for more videos, it is going to be interesting.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

 

How To Cut A Kwikset Key Triton Key Machine

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, How to Cut a KW1 on a Triton Key Machine, Decode KW1 Key, Cut KW1 Key, 

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas! Happy New Year! | Mr. Locksmith™ Vancouver West

Merry Christmas and a Happy New Year to my family, friends, and customers.

Lots of Great Videos coming this Year.

Mr. Locksmith Vancouver: (604) 760-7620

Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West Elf on the Shelf

 

Mr. Locksmith™

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

Merry-Christmas-Mr-Locksmith-Vancouver-West

Merry Christmas Mr Locksmith Vancouver West

Amazon’s Ring video doorbells catch fire! Can’t Fix Stupid | Vancouver West

Amazon’s Ring video doorbells catch fire! Can’t Fix Stupid | Vancouver West

Ring Video Doorbell Fire, Ring and Nest are the two major video doorbell products. Ring Video Doorbell has sold approximately 8,700 units in Canada.

For further information go to https://mrlocksmithvancouverwest.com/

I have tried them both and they do what they say they are going to do. But what’s interesting, this is the Ring notice on it. But there’s been this doorbell 2nd generation tool has been linked to numerous fires throughout the US and Canada. I don’t know about Canada so much, but I know in the U S. Now Ring has not done a recall on this. They have sent out a notice, and we’ll put the link here on the video saying what the problem is. And it’s an interesting problem. So again, this is not really Ring’s problem. What is happening, and I’ll pull this apart here, is people are, it has a little battery pack and you can chargeable batteries or replace them or whatever. But there’s a machine screw that covers the battery pack. Well, what people who have been purchasing this have been doing, instead of the machine screw, they’re taking the longer wood screw screwing it into the housing, and it goes into the batteries and that’s what’s causing the short or the heating and is causing the fires. They have not done a product recall (update Ring has just announced a recall), and I can understand. You can’t fix stupid. The people are going to you know if you have a machine screw and they throw a wood screw in there is that really their fault that customers are stupid. However, we call it regression towards the mean somebody you’ve got to design stuff so stupid people can’t hurt themselves. So I grabbed this Ring video doorbell that is has a battery pack. And this is generation two which they say is the problem.

Let’s see what we got. Never unboxed this one, this is brand new. So there is the Ring. For simple, easy to do, this one is not expensive. I think they’re blowing them out the door cheap right now. It’s not an expensive doorbell. It’s like 100, $150, but it’s, again, it’s not a recall. They’re just saying, and I always loved they come with a nice little kit here, a little, you know it’s got everything in here to install it quite easily. And this is the one for people who don’t have. You have the battery pack because you don’t have the doorbell wires leading to your doorbell. So this is really good with the battery pack for people who don’t have the wired system to the front door. Here is the little machine screws. So there’s one little tiny machine screw, these three other screws.

Ring-Video-Door-Bell-Fire-Screws

Ring Video Door Bell Screws

Ring-Video-Doorbell-Fire

Ring Video Doorbell can catch fire if wooden screws are used instead of machine screws

Ring Video Doorbell Fire

It’s well packaged, Well, you know, well-designed like under $150, I think they’re on sale even less. Let’s warn everybody we have a video. The secret to these things really is they want you on the monthly plan. You can’t blame them for that. They wanna make money. This is a good little kit. Oh, even a little level. Oh my goodness, they got a little bit of everything in here. When you install this, with the wired system or the unwired, there are two areas they can make a mistake on. What’s happening is there, people are taking the woodscrew and there’s when they put this on the door, instead of, this is how you slow people down from stealing it. You put in the little screws on the bottom. So there are two little machine screws, go on the bottom. If you put in the two screws, it slows them down. They have to have a Torx, a small Torx. There are two little Torx screws that go in the bottom. Now what’s happening is people are either losing these because when you try, you’re trying to install this upside down and backward, you know, upside down on your door and you’re gonna lose these little screws. Yeah, it’s just a fact of life. You gotta drop them. People are dropping them, losing them. And whether they’re doing is taking the longer screw putting it into the bottom. And they’re tightening that screw all the way into the battery pack. So it’s not really Ring’s fault. So that’s why it’s, there’s a warning out to the public from Ring on this problem. And this is basically, is just basically people who don’t know the difference between a machine screw and a wood screw and people being stupid and forcing this thing. You really got to crank this to go in there and destroy that lock or destroy the battery pack. It’s a good product. I like their products, they’re good. It’s not a, it’s not a Ring problem.

I hope you enjoyed watching this Ring Video Doorbell Fire video. Subscribe to my channel, also visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Ring recalls 350,000 smart doorbells after some of them caught fire

The potential fire hazard impacts around 350,000 2nd generation Ring doorbells sold in the United States and roughly 8,700 more sold in Canada, according to a notice posted by the US Consumer Product Safety Commission (CPSC) on Tuesday. The $100 doorbells were sold on Ring’s website and on Amazon (AMZN) between June 2020 and October 2020, according to the CPSC.
“The video doorbell’s battery can overheat when the incorrect screws are used for installation, posing fire and burn hazards,” the notice said.
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.
Mr. Locksmith™ Locksmith Courses: http://mrlocksmithtraining.com/ 4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/ How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/ How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/ How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/ Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/ ONLINE AUTOMOTIVE LOCKSMITH COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/ Business email: [email protected] Fan mail/products to be reviewed can be sent to: Mr. Locksmith 1685 H Street Blaine, Washington 98230
Ring-Video-Door-Bell-Fire-Mr-Locksmith

Ring Video Door Bell Fire Mr. Locksmith

How To Fix a Sticky Lock Vancouver West

How To Fix a Sticky Lock Vancouver West

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

For further information go to https://mrlocksmithvancouverwest.com/

If you have a sticky lock, whether it’s on your house, your business, a padlock, or your car door, a car ignition is different, if you have a sticky lock, there is a couple of solutions you can do.

Never, never put oil, or linseed oil, or motor oil, or sewing machine oil, or even graphite. Graphite, do not put that into your lock. Now, WD-40 is penetrating oil. It’s fantastic for getting a sticky lock unstuck but is not a lubricant.

My favorite for a lock is Tri-Flow, just love this stuff. Put a little spray, it does not take a lot, just put a little spray into your lock and it will be fantastic. Or now you know Lock Saver, there’s Houdini. I don’t have any Houdini handy, but this is my go-to is Tri-Flow. So again, WD-40 for sticky locks. It will unstick it, but it’s not gonna lubricate it. Tri-Flow will lubricate the lock perfectly.

Do not use graphite, graphite is bad for you. It’s not good for the locks. It’s an old way of lubricating locks, don’t do it. So go to Tri-Flow. If the lubricant does not work, it could because your key is old and worn, especially on cars we find that a lot. So cutting you a brand new key to factory code, the lock usually works perfectly after that. So it could be a worn key. Your lock could be worn and the lubricant may be a temporary fix, but it is not going to fix the problem. You have an old lock on your door or the padlock’s old, it’s worn out, you need a new lock. And sometimes, especially with the Honda ignitions, the high security, sometimes the ignition needs to be, the parts, replaced, and you would need a new key because those things just seem to wear out.

How to Fix a Sticky lock Vancouver West

How to Fix a Sticky lock Vancouver West

The other issue could be that the door is sticking. So it could be the hinges are dropping, or what really happens, with the change of weather, is the latch, or the deadbolt specifically, is not lined up anymore with the hole. So I have a few more videos on how to fix that. But the way to see if it is the problem is the door frame is open the door and does the key work the lock perfectly? So if the door is open and you can turn the lock perfectly and then when you close the door and it does not lock, then the problem is with your door frame. However, if you open the door, try the key, and it’s still jammed, then the problem is your door.

Locked Out because of a Sticky Lock?

In conclusion, do not use WD-40, oil, linseed oil and do not use sewing machine oil. WD-40 is, a penetrating oil, it’s good but it is not going to lubricate your lock. Use a Lubricant that is meant for locks, Tri-Flow is my favorite. Lock Saver and Houdini are good.

If you have any recommendations, put it at the bottom. So this will help you with sticky locks.

Mr. Locksmith™

Mr. Locksmith Vancouver West (604) 760-7620

Automotive Locksmith Vancouver West (604) 760-7620

How to Fix a Sticky Lock Vancouver West

How to Fix a Sticky Lock Vancouver West