High Security Primus Deadbolt | Mr. Locksmith Vancouver West

By

High Security Primus Deadbolt: High-security UL 437 listed cylinder and are tested under UL’s strict standards and are able to withstand extreme physical attack. Mr. Locksmith East Vancouver is an Authorized Primus Dealer.

High Security Primus Deadbolt | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

Mr Locksmith Primus cylinders feature High-security UL 437 listed cylinder and are tested under UL’s strict standards and are able to withstand extreme physical attack. Schlage Primus is a unique, patented type of key that features additional side “cuts” or “millings” that make the lock extremely difficult to manipulate and open. These side cuts work in conjunction with a “side bar” located inside the Schlage Primus lock cylinder.

High Security Deadbolt Vancouver West BC

Schlage Primus is a unique, High Security Lock, patented type of key that features additional side “cuts” or “millings” that make the lock extremely difficult to manipulate and open. These side cuts work in conjunction with a “side bar” located inside the Schlage Primus lock cylinder. Security Patented against unauthorized key duplication All Primus keys are tightly controlled and have a unique, factory-milled side bitting design that is geographically defined and can be made exclusive to the user at a local or even national level Optional, high-security UL 437 listed cylinders feature hardened steel drill pins and are confirmed under

Pick Resistant Lock Vancouver West BC

UL testing protocols as pick-resistant, drill-resistant and capable of withstanding extreme physical attacks. The unique factory-milled side bitting on a Primus key makes unauthorized duplication highly preventable,

The Schlage Primus High Security Lock is a well-known and respected brand in the field of security locks. It offers an added layer of security and protection against unauthorized access compared to standard locks. Here are some key features and details about the Schlage Primus High Security Lock:

  1. Key Control: One of the main advantages of the Schlage Primus system is its key control feature. It uses a patented keyway design that restricts the duplication of keys without proper authorization. This helps prevent unauthorized key copying and enhances overall security.
  2. Primus cylinders feature High-security UL 437 for Pick Resistance.
  3. Pick and Bump Resistance: The Primus lock cylinder incorporates advanced security measures to resist picking and bumping attacks, which are common techniques used by intruders to manipulate traditional locks.
  4. Drill Resistance: The lock is designed to withstand drilling attempts, as it contains hardened steel inserts and additional security pins that make it more resistant to drilling attacks.
  5. Patented Restricted Keyway: The Primus system uses a restricted keyway, which means that the key blanks are only available to authorized locksmiths who are registered with Schlage. This restricted distribution helps maintain key control and ensures that only authorized individuals can make duplicate keys.
  6. Master Keying: The Primus system allows for master keying, which is useful for situations where multiple levels of access are required. It enables the creation of a hierarchy of keys, where certain keys have access to specific locks while a master key can open all locks in the system.
  7. High-Quality Construction: Schlage Primus locks are known for their durability and reliability. They are constructed with high-quality materials and undergo rigorous testing to meet industry standards.

Licensed Locksmith Vancouver West BC

It’s important to note that while the Schlage Primus High Security Lock provides enhanced security features, no lock is completely impervious to all forms of attack. It’s always recommended to use multiple layers of security, such as combining the lock with other security measures like surveillance systems or alarm systems, to maximize overall protection.

Schlage Primus Lock Vancouver West

Schlage Primus Lock Vancouver West

High Security Locksmith Vancouver West

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS: https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith Primus High Security deadbolts are a specific line of high-security deadbolts offered by Mr. Locksmith Vancouver West. Primus is a brand of locks developed by Schlage, a well-known manufacturer of security products.

The Primus High Security deadbolts are designed to provide superior resistance against picking, drilling, and other forms of forced entry. They incorporate advanced features that make them more resistant to manipulation and unauthorized key duplication.

One of the notable features of Primus High Security deadbolts is their patented sidebar technology. This sidebar mechanism adds an additional layer of security, requiring both a unique key cut and proper alignment of the sidebar pins to operate the lock effectively.

Contact Mr. Locksmith Vancouver West BC

Furthermore, Primus High Security deadbolts often use restricted key systems, which means that the keys can only be duplicated by authorized dealers or locksmiths who have the necessary equipment and authorization from the lock manufacturer.

Mr. Locksmith Vancouver West: (604)760-7620

Please Contact Mr. Locksmith for the most accurate and up-to-date information on their Primus High Security deadbolts.

Mr. Locksmith™ Vancouver West

Call Mr. Locksmith Right Away for Qualified Locksmith & Security Services in Vancouver west British Columbia!

We serve the following neighborhoods in Locksmith Vancouver West British Columbia: Brookswood, Aldergrove, Campbell Valley, Cloverdale, Murrayville, Otter District, Salmon River, Walnut Grove, Fort Langley, Glen Valley, City of Langley, Downtown Langley, Township of Langley, Willoughby Heights, Langley City, etc.

High Security Primus Deadbolt Vancouver West

High Security Primus Deadbolt Vancouver West

 

 

Filed Under: High Security Deadbolt, High Security Key, Licensed Locksmith, Locksmith Near Me Vancouver West, Locksmith Training, Locksmith Vancouver West, Locksmith Videos, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Primus Deadbolt, Schlage Deadbolt, Terry Whin-Yates, Youtube Locksmith, Youtube Mr. Locksmith Tagged With: , , , , , , , , , ,

Locksmith Tools for Apprentice Locksmiths 2023 | Mr. Locksmith Vancouver West

By

Locksmith Tools for Apprentice Locksmiths 2023: This video is of my EDC (everyday carry) for every job. I have another tool bag with an installation kit, but this is my basic rekey, basic lockout kit. It has almost everything I need. Also, this is the tools I recommend for all new and experienced Locksmiths.

Locksmith Tools for Apprentice Locksmiths 2023

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Tools for the Apprentice Locksmith

Everyday Carry Locksmith Tools (EDC)

  • Veto Pro Pack
  • Milwaukee Drills
  • Meta Pro Screwdrivers
  • Klein Screwdriver
  • Tri-Flow Lock Lubricate
  • Lab Mini Pin Kit
  • Drill Bit Ki
  • Wera Tools
  • Knipex Pliers
  • Security Bit Set
  • Bypass Tools
  • Loids

Thank you for joining me today. This is the, my tool case I use for everyday. This is like, almost, like the case that goes to every single job. Now, everybody has their own preferences. Actually, I almost prefer a slightly bigger case. I tend to specialize, in our company, I tend to specialize in the lock out or locked in their house or out of a cabinet, bathroom, whatever. So I like to do lock outs. With all these big box hardware stores selling the cheapest, crappiest locks to the public that were getting malfunctions like crazy. People are getting locked out, locked in. They’re failing like crazy. Plus, we have so much new construction, they’re putting in crap locks. They’re putting in $10 dead bolts that don’t last. We’re getting malfunctions like crazy. So my main thing that I do is lock outs, you know, quick rekeys. I spend a lot of my time in the office, but I love going out and doing lock out. So I’ll just grab my kit and we’ll go over all my different kits in the other videos.

Lock Installation Kit

But I have an installation for installing lock kit. I have a kit for doing, like, large rekeys. This is just short and sweet and does lock outs. Sometimes, I put this on a wheeled cart and on the wheeled cart, we’ll have extra locks for what I think is for the job if I have to replace, but again, this is mine. Everybody has their own preferences. Some people, we’ll just see. This is just one of many. I tend to have a box per job. If I have broken keys and locks, I have another little bag. We’ll go over that in another video. So this is just lock outs. Your locked out of your house, locked out of something, office, quick, easy rekeys, remove and replace a faulty lock. So this is my kit. I always have my picks and we’ll go in details everything.

Lock Picks

I usually carry two cases of picks. I like my picks. This is my favorite set. We’ll go over that. We’ll find the other ones in a bit.

Lock Lubricates

I like WD-40. Now, I use Tri-Flow is my lubricant that I like and there’s advantage and disadvantages to it, dry or whatever. I like Tri-Flow. Use it a lot. When I pick locks, I use WD-40. If I can’t pick a lock, and I spray it with WD-40, it always opens for me. I have, my friends, they can’t pick a lock and then they use Tri-Flow. It’s personal preference. I think it’s a mental problem with me. I think I’ve just been using Tri-Flow my whole life. This is what I’m used to. And of course,

Milwaukee Drill

I have Milwaukee. We’re not sponsored by Milwaukee. I just like to standardize my batteries. So I have my little, cordless drill. This is not a brushless. This is a really, this thing, I think this thing’s like 12 years old. It’s over 10 years old. And I like the batteries and I got my LED light and it takes the same battery, so, and I love these because I have the little, I can see what my battery power is on that. So cordless, this is only a cordless screwdriver. It’s what I like. I always take a drill. It’s not a hammer drill. I have a hammer drill in the truck if I need something more heavy duty. This is the FUEL system. This one’s getting pretty old now. The next videos, I’ve, replacing the three amp batteries. I got one smaller, more power. The half size ones, I just don’t find have the guts to drill, if I have to drill out a lock, a sheer line or its malfunctioned, I gotta drill out the screws. So you’ll see the new battery in another video, right after this, coming up, that I’m replacing. It’ll be lighter and way more power. So it’s not a hammer drill, just for basic stuff. Again, I like the batteries. I standardized the batteries.

Loid

This is just a milk jug or a Lloyd. I have videos on this. I don’t know how, this gets me into a lot of locks. There’s so much gap in the door. I just use this. And I slip the lock. Lots of videos on me using a Lloyd, is the proper name, to slip the lock, way better than a credit card, there’s other materials, and I’ve got some new videos coming up soon with me making different versions, more heavy duty. But again, this one, it’s just a milk jug and it gets me in so many locks.

Tools to Slip Open Locks

Oh, these are my next, a lot of times, if I can’t pick it or it won’t be picked or I can slip it. So I have, this is just a painter’s tool. This will open up latches. It’s already made. It’s ready to go. It’s inexpensive. It does the trick. So I think they use this for cleaning the rollers, opening the lids. Great tool, use it all the time. And then I have just some flat ones, different things and just for slipping latches. And that’s my three main ones I use. It’s all good.

Pliers

Let’s get into, I like a large pair of vice grips. I have my Hex Key sets. This is a new one. Video coming up on this. So I have the metric and I have the standard. Always got to have those. We get into my other pick set. I like picks. So I have, ones that I have here are for my pocket. This is always in the kit. I’ll go into these more in depth.

Lock Installation Tools

You know, if we are replacing the lock, and I gotta mortise it out, if there’s a drive in, I gotta mortise it out, I just have these in there. They should go in my installation bag. My basic drills. It may say Milwaukee, but I have a little bit of everything in here and we’ll go over the drill preferences in another video, And I go through a lot of eight, eighth-inch and quarter-inch drills. I like the jobber bits, the blue steel, some people call them jobber bits. They’re very forgiving. They don’t snap, but I have my coal bolts and whatever, it’s for drilling stainless or really high security locks. I have lots and lots of drill bits. And I’ve had videos on these. They’re Megapros. And this one just has all your standard Roberts, Phillips, has some torques. These are great. This one’s for the Hex. You know, just all in one spot. And this one, if you don’t have it, get it. It’s got all these security bits. I have videos on each one of these. This is just showing you my everyday kit. This is kind of interesting. This is actually for opening up a car, for getting a little bit of leverage so I can get my airbags in there. So I use this sometimes, I gotta just spread the door a little bit. And I don’t wanna do damage to it. This just holds it, you know, spreads it nicely, just to get a little bit more leverage into the latch or sometimes the faulty deadbolts, the bolt is not going back for mostly malfunctions. That’s just another little tool to help. Always get the vice grips or the channel grips, just handy. We do a lot of wellness checks for police, different agencies, you know, with the animal control bylaw officers with the various police departments. So I have a bigger kit that gets us ready for hitting almost anything, when we have to open up something, when it’s involving a warrant for the police. That’s another kit. This is just my small vice grips. I always like my Wera screwdrivers. This is a flat head and I’ve ground it down a little bit so it just fits perfectly. Sometimes, you know, you get the customers where the plug has come out of the lock. I can just put this in there, turn it, open up the door. It’s got the, you know, strike all the way through. Just more little Wera’s flat heads, you know, if we’re doing Adams Rite, I’ve taken out the mortise cylinder, the little flat head screw in there, sometimes they’re Allen keys. A lot of times they’re just little flat head. So I just like to have various sizes of that. I got two of these. This should go in the other kit. Again, that’s the Megapro. I don’t know why have this, had this since I was an apprentice. My granddad had it. It just always in my tool case. It’s, I don’t really use it that much. It’s just good luck. Another one of my flat heads. Oh, you can’t go wrong. Gotta have a good, aw, this Mac Tool. I like this. If I have to depress the retainer, it’s just heavy duty, lasts forever.

Pry Bars

Another little, tiny pry bar. Again, two pry bars. Sometimes you gotta just open up that, spread that door just a little bit more, gotta be a little bit tougher than using this one that won’t make any marks. Sometimes a break in, everything’s busted up, the door’s all beat all to heck. These two little pry bars, yes, there’s bigger pry bars. That’s in another kit and I’ll show you in another video. This is just my everyday carry and we got little vice grips. It’s all ready to impression. And sometimes when impression locks, or just grab something small. What do they call that? Castle nut. It’s got both sides. Boy, if you don’t have this, and you’re pulling apart some of the grade one lever locks, jeez, you’re toast without this. So you gotta have that castle nut in there. I like to have one chisel, one inch, just for if I have to mortise it out, the latch a little bit. Always gotta have my adjustable and I have a larger one in my installation kit for using, you’ll see. If you watch the video, you’ll see why we have a larger one and what we’re doing for metal doors with that. Couple more, again, like I said, I do a lot, this is my lock out kit. I’m doing lock out. So I’ve got various, little pry bars. You know, sometimes you can force the latch, slip the latch. I got a little Snap-on set, little plasticky one. This thing works out quite well. What else do we have? A couple more screwdrivers. I just like my screwdrivers and an awl, nice little pointy. If my large one is too big, I got the little one. I can just push the retainer or somebody’s broken key, another awl, I really don’t need that one in there.

Circlips Pliers

Oh, circlips. Still get a lot of locks, mostly the older-style stuff. But if you don’t have this, let’s take the Wei, the old-style Weiser Key-in-Knobs. You got that little retainer clip on the back. I always get the Snap-on ones cause they last for, you know, the replacement, if something breaks, they last forever. Always have these in there. Hardly use ’em but when I do need it, I need it. A needle nose, you know those pliers. Have you ever get locked out and the malfunction is actually in the bolt of the lock or the latch? So I drilled off the deadbolt. I pulled and pried all the bits and pieces to get that bolt back. And sometimes the thing is just falling apart so bad. You just got to strip it down piece by piece. So this gets right in there and pulls it out. One inch spade bit. And it’s amazing how many doors, the doorframe they have not, they drill a half-inch hole for a deadbolt. Just gotta open up that little bit more. So I always have one of these in there. This used to come with like every Schlage Lock, super handy. Jeez, these are like gold now, if you can get your hands on ’em. Always have a couple of these around. What else do we have in the kit? More little screwdrivers, more little awls, you know, hook awl for poking. Some of these are Mac, some of these are Snap-on, Wera, or sometimes they’re just something cheap that I’ve just modified. Of course, lipstick, see the video, but it basically is for marking the bolt to see where the door is scratching. Gotta have lipstick and red, any color you want, really. Now, I always carry a few popular keys. I have about five keys ready. Precuts, Schlage, Kwikset, Weiser, whatever your popular locks are. I always have them in my, a few in my kit. If I know what the customer has, I’ll precut the keys. I hate cutting keys on the job site. So I’ll have sets of five or 10 ready to go. This is my mini LAB re-keying kit. I love this. I, you know, I’m just going in to rekey one or two locks or whatever. So I just throw my pins in here. I got the 005. I have the 003s. I prefer the 005. I know most people prefer the 003. I got the Wedge kit in my service truck. This crams in here. It gets it going. So that’s for my rekeying. Here’s my kit. This is my basic rekeying, or rekey kit and also a few other things. So I always throw a couple of my favorite picks. One of my favorite picks at the moment is the hook and ball. This is a Rytan. I got some Petersons. I got some that I’ve made up. So I have that little kit in there. I throw a couple of shims in there, dental pick. This is an Allen key for Lorilocks. Boy, I hate those things. If I don’t have this, then I’m screwed. I have my end cap removal tool.

Kwikset Removal Tool

I have my pickle, your Kwikset cylinder removal tool. Some people call it the pickle. I got a little follower in there. A couple blanks for shimming. If I have to put on the end of my drill, I put out the little grinders to drill out the strike, especially at the change of seasons. Basically, I got different versions for just really grinding up the strike when they’re sticking. Oh, of course, my tweezers, more little followers, a couple of things for pulling out broken keys. Again, this is just the small, quick kit just to pull out, if I get a broken key. That just, this use, and these are Peterson’s. This is fantastic. I think they’re only $5 each. Just spiral it in there and pull it out. That’s just amazing for pulling out broken keys. Let me show you my picks. I got, this is my everyday. This is like, these are my two sets I always carry. So here I have my favorites in here. I got my plug spinner, different tension wrenches, again, different picks. This, you know, this set will do almost everything.

Plug Spinner

And again, the plug spinner, A1 Plug Spinner. I have Rytans. I got a little bit of everything. They’re all good. There’s another little kit with just a, sort of, a backup of my favorites. You know, here’s my Peterson, Rytans, A1 Plug Spinner. My Rytan Plug Spinner’s in another kit. Right now, these are my favorites. My HPC followers set. So this will do, so basically, it’s sort of four followers, here’s the most popular and they got the ends are all done. So we got 1, 2, 3, 4. It’s a great little set. Of course, I have the ones that I make, but then this is just a ready-made kit, ready to go. It’s always there. We make these up ourselves. I just buy six-foot, one-inch brass, cut ’em and then we shape ’em. You know, when I got some time, shape ’em for what we need done for various, but they all start off like this, just for the simple locks, quick, easy, fast. And this is when we get a little bit more complex designs, some locks that are giving us trouble. This is my kit. This is my everyday, it’s the first thing I grab to do a lock out. Yes, there’s more stuff to have. And I have bigger kits. This doesn’t do everything. I’m always interested in everybody’s new ideas. I love seeing new tools. I like seeing how different people use different, how they set up their bags. And this is just, and this is a PACKOUT bag. If I go to a larger job, the PACKOUTs are kinda nice. And it also, redesigning a new service truck. So the PACKOUTs just lock in there really, really nice. So, and this fits on top of the little wheeled thing. If I get a bigger job, I’d take the wheels. If I got stairs or whatever, I can put this on top of a rack. So I think I need one slightly bigger. This is a lot of tools. It’s what I like. This will, I rarely have to go back to my service truck.

And again, it depends what I’m doing for the job. I have other videos, shows my broken key extractor set. I have an installation set. I have a big set we’re putting together for more brute force and ignorance, wellness checks, assisting the police on opening doors. A lot of times they don’t want to bust down the doors. It’s, we can come in nicer. Even if we have to pick it, if we’re locked out, we can pick it real easy. Or if we even have to drill the lock, we’re set up for it. I’ll have to tell the story another day, we just had a job from hell and everything went wrong. And that’s what made me re, sort of decide how I have to do my major lock out kit, where we have to go in, of course, nobody’s inside, so we’re not worried about people being inside, but we still have to get through in a timely manner, a little bit quicker than normal. So it’s gonna involve probably saws-saws, cordless cutters, grinders, larger, more heavy duty drills. And standby for my next video on my, the new battery for this, should make it lighter. It should make it a little bit better, more power, lighter. And I’ve tried the half size, the 1.5s on these. They can do the job. But really, if we’re drilling a lock or installing the lock, you need a little bit more umph.

So I think I found a happy medium between the half size of this, the 1.5s. This is the 3.0s, and I have a new 3.0 and a really interesting video on that. Give your suggestions. What are the tools you carry on your everyday carry going in? I hope this is a help for beginner locksmiths. You know, this is 25 plus years of me doing jobs. And this is my kit. I’m always interested in how you do it. Have some suggestions. There’s always more we can carry. And I have other kits for other jobs, bigger jobs, installation jobs, or more complex lock outs. This is just a very, very simple kit. And it probably does, for me, my simple lock outs and my simple rekeys, this probably does 90% of what I need. Okay, hope you enjoyed the video. Please like it. Please subscribe. Have a good day. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

Call Mr. Locksmith Right Away for Qualified Locksmith & Security Services in Vancouver West British Columbia!

We serve the following neighborhoods in Locksmith Vancouver West British Columbia: Brookswood, Aldergrove, Campbell Valley, Cloverdale, Murrayville, Otter District, Salmon River, Walnut Grove, Fort Langley, Glen Valley, City of Langley, Downtown Langley, Township of Langley, Willoughby Heights, Langley City, etc

Locksmith Tools for Apprentice Locksmiths 2023

Locksmith Tools for Apprentice Locksmiths 2023

Filed Under: Locksmith Near Me Vancouver West, Locksmith Tools, Locksmith Training, Locksmith Vancouver West, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Vancouver West Locksmith, Youtube Locksmith Tagged With: , , , , , , , ,

August Smart Lock Not Opening | Mr. Locksmith Vancouver West

By

August Smart Lock Not Opening Vancouver West BC: Mr. Locksmith Vancouver West is a locally family owned and operated locksmith business that has been running over 25 years. We provide professional locksmithing & security services in Vancouver West BC. Locked Out? Need Keys? Call Mr. Locksmith Vancouver West. Terry Whin-Yates is a 3rd Generation Locksmith and has a BA (Hons) in Criminology from Simon Fraser University. Visit Mr. Locksmith YouTube with 100,000+ Subscribers: http://www.youtube.com/user/24hrMrLocksmith

August Smart Lock Not Opening Vancouver West

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

The August Smart Lock is installed on the inside of the door and it on the outside is the existing deadbolt. A lot of times these deadbolts are just garbage deadbolts to start with that are going to fail. And then you have the homeowner installing the lock on the inside it seems to be doomed for failure. And that is why we are running across a lot of these lately and some of it is in my opinion is poor design of the lock and they are putting it onto crappy locks on the outside. I have had no luck at all installing these.  Also, I am not happy with them at all. I advise my clients not to install it. Here I have an August lock and it has August lock on the inside. Also, you can see it is an August smart key lock on the outside and a Weiser or Kwikset.  I run across both of these now first of all I am not a fan of the Weiser or Kwikset smart key locks. They have a huge amount of failures.

August Smart Lock Problems Vancouver West BC

In this case, it is not the lock, the key is turning but it’s not retracting the deadbolt. What normally happens is and what happened in this case is the August lock has failed. On the inside it is jammed up. Also on top of that and the batteries are dead. There have been other problems the customer cannot use their app to unlock it from their internet or Wi-Fi or Bluetooth. Also they cannot open it with the key. I have had failed deadbolts at the same time in this case the deadbolt is okay. It is functioning but and you’ll see this when I get it open the bolt retracts no problem. What I have to do here is I have to drill the mounting screws that hold it on the door. Their are the two mounting screws. Now I just I pre-drilled that was hard to video this and drill at the same time so it’s pretty easy to find where the mounting screws are and I just drilled out the mounting screws. It drills up pretty easy.

August Lock Not Working Manually Vancouver West BC

I use good quality drill bits. I just use HSS steel. I have drilled off the lock on the outside and the August smart lock mechanism on the inside just falls down. Then it is quite simple now all I have to do is take my screwdriver and open the door. It is not the problem of the lock in this case or the bolt. What has happened is the August lock has totally failed. It is jammed up the tailpiece on the deadbolt and I had to drill it get it off. What I do then in this case we just installed because the house is for sale I just installed a Schlage deadbolt. I like these this is just a very simple one, not expensive. It is the commercial grade Schlage deadbolt and I’m quite happy with. It is a good lock. The Keyless Locks I prefer is the electronic Schlage Deadbolt that would be the one I would recommend.

Keyless Door Locks Vancouver West

Keyless Door Locks Vancouver West

Call Mr. Locksmith Right Away for Qualified Locksmith & Security Services in Vancouver West British Columbia!

We serve the following neighbourhoods in Locksmith Vancouver West British Columbia: Brookswood, Aldergrove, Campbell Valley, Cloverdale, Murrayville, Otter District, Salmon River, Fort Langley, Glen Valley, City of Langley, Downtown Langley, Township of Langley, Walnut Grove, Willoughby Heights, Langley City, North Langley, Port Kells, etc.

August Smart Lock Not Opening Vancouver West BC

August Smart Lock Not Opening Vancouver West BC

 

Filed Under: August Smart Lock, Locksmith Near Me Vancouver West, Locksmith Tools, Locksmith Training, Locksmith Vancouver West, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Vancouver West Locksmith Tagged With: , , , , , , , , , ,

3D Printing Schlage SC1 Key | Mr. Locksmith Vancouver West

By

3D Printing Schlage SC1 Key Vancouver West BC: Mr. Locksmith Vancouver West is a locally family owned and operated locksmith business that has been running over 25 years. We provide professional locksmithing & security services. Terry Whin-Yates is a 3rd Generation Locksmith and has a BA (Hons) in Criminology from Simon Fraser University.

YouTube Creator Award Silver Button: Visit Mr. Locksmith YouTube with 100,000+ Subscribers: http://www.youtube.com/user/24hrMrLocksmith

3D Printing Schlage SC1 Key Vancouver West BC

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

3D printing is the process of creating a three-dimensional object from a digital design using additive manufacturing techniques. The process involves creating a design using computer-aided design (CAD) software, which is then loaded into a 3D printer that creates the object by adding successive layers of material until the final product is complete.

3D printing has a wide range of applications, including rapid prototyping, product development, and manufacturing, as well as in industries such as healthcare, aerospace, automotive, and architecture. It can also be used for creating one-of-a-kind items, such as customized jewelry or art pieces.

3D Printing Schlage SC1 Key Vancouver West BC

3D printing a Schlage key, or any other key for that matter, is not a recommended practice. Keys are designed to fit very specific tolerances and 3D printing may not produce the precision needed for a key to properly function.

Additionally, many keys, including Schlage keys, are protected by patent, and copying or reproducing a key without the proper authorization may be illegal.

If you need a new Schlage key, it is recommended to obtain one by calling Mr. Locksmith to ensure the key is properly made and functions as intended. Attempting to 3D print a Schlage key may result in a key that does not work or even damages the lock, which can be costly to repair or replace.

3D Printing for the Locksmith

While 3D printing technology has advanced significantly in recent years, there are still limitations to what can be produced with this method. The quality of the final product can depend on a number of factors, including the type of printer, the quality of the material used, and the design of the object itself. Additionally, 3D printing may not be the most efficient or cost-effective method for mass production of certain items.

Overall, 3D printing has become an increasingly important and versatile technology, and its continued development is expected to have a significant impact on a wide range of industries and fields and locksmithing in the future.

Call Mr. Locksmith Right Away for Qualified Locksmith & Security Services in Vancouver West British Columbia!

We serve the following neighborhoods in Locksmith Vancouver West British Columbia: Brookswood, Aldergrove, Campbell Valley, Cloverdale, Murrayville, Otter District, Salmon River, Walnut Grove, Fort Langley, Glen Valley, City of Langley, Downtown Langley, Township of Langley, Willoughby Heights, Langley City, etc.

3D Printing Schlage SC1 Key Vancouver West BC

3D Printing Schlage SC1 Key Vancouver West BC

 

Filed Under: Locksmith Near Me Vancouver West, Locksmith School, Locksmith Tools, Locksmith Training, Locksmith Vancouver West, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Vancouver West Locksmith Tagged With: , , , , , , , ,

3D Printed Lock Pinning Tray | Mr. Locksmith Vancouver West

By

3D Printed Lock Pinning Tray: Mr. Locksmith is a locally family owned and operated locksmith business that has been running over 25 years. We provide professional locksmithing & security services. Terry Whin-Yates is a 3rd Generation Locksmith and has a BA (Hons) in Criminology from Simon Fraser University.

YouTube Creator Award Silver Button: Visit Mr. Locksmith YouTube with 100,000+ Subscribers: http://www.youtube.com/user/24hrMrLocksmith

3D Printed Lock Pinning Tray

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive: (604) 259-7617

3D Printed Lock Pinning Tray 3D printing can be used to create a variety of tools and accessories for locksmiths, including lock pinning trays, jigs, and other specialized tools. A lock pinning tray is a tool that is used to organize and sort the pins, springs, and other components of a lock during the rekeying or servicing process. 3D printing can be used to create customized lock pinning trays that are tailored to specific types of locks or specific locksmithing tasks.

3D Printing Locksmith Tools Vancouver West

In addition to lock pinning trays, 3D printing can also be used to create other locksmith tools, such as lock picks, tension wrenches, and key gauges. 3D printing can allow for more precise and detailed designs, which can result in more effective and efficient tools. However, it’s important to note that 3D printing locksmith tools may not always be the most durable or reliable option, especially for tools that need to withstand heavy use or significant force. Professional-grade locksmith tools are often made from high-quality materials and are designed to withstand the demands of the job. 3D Printing 3D printing is the process of creating a three-dimensional object from a digital design using additive manufacturing techniques. The process involves creating a design using computer-aided design (CAD) software, which is then loaded into a 3D printer that creates the object by adding successive layers of material until the final product is complete.

3D Printing Designs Vancouver West

3D printing has a wide range of applications, including rapid prototyping, product development, and manufacturing, as well as in industries such as healthcare, aerospace, automotive, and architecture. It can also be used for creating one-of-a-kind items, such as customized jewelry or art pieces. 3D Printing for the Locksmith While 3D printing technology has advanced significantly in recent years, there are still limitations to what can be produced with this method. The quality of the final product can depend on a number of factors, including the type of printer, the quality of the material used, and the design of the object itself. Additionally, 3D printing may not be the most efficient or cost-effective method for mass production of certain items.

3D Printed Lock Pinning Tray Vancouver West

3D Printed Lock Pinning Tray Vancouver West

Overall, 3D printing has become an increasingly important and versatile technology, and its continued development is expected to have a significant impact on a wide range of industries and fields and locksmithing in the future. Mr. Locksmith™

Call Mr. Locksmith Right Away for Qualified Locksmith & Security Services in Vancouver West British Columbia!

We serve the following neighborhoods in Locksmith Vancouver West British Columbia: Brookswood, Aldergrove, Campbell Valley, Cloverdale, Murrayville, Otter District, Salmon River, Walnut Grove, Fort Langley, Glen Valley, City of Langley, Downtown Langley, Township of Langley, Willoughby Heights, Langley City, etc.

3D Printed Lock Pinning Tray

3D Printed Lock Pinning Tray

 

Filed Under: Locksmith Near Me Vancouver West, Locksmith Vancouver West, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Vancouver West Locksmith, Youtube Locksmith, Youtube Video Tagged With: , , , , , , , , ,

10 Most Liveable Neighbourhoods in Halifax

By

10 Most Liveable Neighbourhoods in Halifax: RE/MAX explores more than 300 of Canada’s most liveable hot spots in the new 2020 Liveability Report. Here are our top picks in Halifax.

Source: 2020 Liveability Report.

10 Most Liveable Neighbourhoods in Halifax

  1. Dartmouth Commons
  2. Kempt Road Halifax
  3. Penhorn Halifax
  4. Windmill Road Halifax
  5. Brightwood Dartmouth
  6. Westwood & the Pubs Halifax
  7. Grahams Corner Dartmouth
  8. Woodlawn Dartmouth
  9. Southdale Dartmouth
  10. Woodside Dartmouth

Source: https://blog.remax.ca/best-places-to-live-halifax/

Some other highly liveable Halifax neighbourhoods include North End Halifax, Downtown Dartmouth and Clayton Park. Each of these neighbourhoods are ideal for buyers looking for proximity to work, walkability, and proximity to retail.

Halifax Locksmith

Mr. Locksmith Halifax (902) 334-6288

Call Us Right Away for Qualified Locksmithing & Security Solutions in Halifax Nova Scotia!

Mr. Locksmith Halifax services the following areas: We provide locksmith services in  Halifax, Dartmouth, Bedford, Sackville, Chester, Truro, Windsor, and Halifax County. Also, Simms Settlement, Bridgewater, Kentville, Elmsdale, Enfield, Eastern Passage, Spring Garden, Downtown Halifax,  Halifax Central Library,  North End, Göttingen Street and Hydrostone commercial areas, Quinpool District, West End, Downtown Dartmouth, Dartmouth Marine Slips, King’s Wharf, North Preston, Halifax Peninsula, Harbour Drive, Citadel Hill, Halifax Town Clock, South End, West End an North End, Dalhousie University’s, Richmond District, Citadel Hill and the Halifax Harbour.

 

Filed Under: Blog, Halifax Most Liveable, Halifax Neighbourhoods, Locksmith Stories, Locksmith Vancouver West, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Top 10 Places To Live in Halifax Tagged With: , , , ,

Milwaukee PACKOUT 3 Drawer Toolbox | Mr. Locksmith Vancouver West

By

Milwaukee PACKOUT 3 Drawer Toolbox | Mr. Locksmith™ Vancouver West: The Milwaukee Modular Storage System is a durable storage system. The PACKOUT 3-Drawer Tool Box has a 50lbs weight capacity and a locking security bar allows you to padlock the drawers closed keeping them securely shut during transport.

Milwaukee Drawer Toolbox

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS: https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

The tool box is constructed with impact resistant polymers, all-metal ball bearing slides, and metal reinforced corners for ultimate jobsite durability. The 3-Drawer Tool Box also allows you to customize their drawer layout with Quick-Adjust Dividers.

The PACKOUT™ Modular Storage System allows you to customize your storage system for easy transportation and organization of tools and accessories.

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

I love my Milwaukee PACKOUT kit, kits and all my bits and pieces. I am super happy now. Had the two drawer the other day. Just got my three drawer in. Absolutely in love. I’m revamping how I do everything. This goes into the truck, the service truck nicely, goes into the shop nicely. I’m looking at a racking system. I’m happy with my wheeled cart. Getting older. We have a lot of apartment buildings.

I have my PACKOUTS for my mailbox kit, my deadbolts, and I just modular how I do things, or just grab it out of the truck or out of the shop. I don’t keep a lot of my safe opening gear in the service truck. I keep it in the shop. When I need it, I take out what I need and go to the job site. So this is gonna be great for locksmiths. I can lock it on the job tighter in the truck. Just added security. I have the smaller drawers, which is good for my pin kits. I don’t need the big drawers. This is gonna be full of deadbolts, Adams rite, the larger locks. This’ll be the, more the specialty lockout tools, maybe more the cylinders.

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths | Mr. Locksmith Vancouver West

My mailboxes are in a special PACKOUT already. So this will be like the different pin kits, my medical pin kit, my multi lock pin kit. So this will hold my more specialty tools, my pin kits, my medical pin kit, my lab pin kit. This is gonna be interesting. So I’ll start working on getting it all together. This is going to be great. I will have more videos coming on how I am setting up all my locksmith tools and gear and the stock into the kits.

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

 

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ Vancouver West email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching! 🙂

Milwaukee PACKOUT 3 Drawer Toolbox

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Filed Under: Automotive Locksmith Near Me Vancouver West, Locksmith Near Me Vancouver West, Locksmith Vancouver West, Locksmith Vancouver West Category, Locksmith Videos, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: , , , , , , ,

Knipex Pliers Replace Adjustable Wrench | Mr. Locksmith™ Vancouver West

By

Knipex Pliers Replace Adjustable Wrench: KNIPEX pliers stand for quality made in Germany. Worldwide leading pliers manufacturer for professional users in trade and industry.

Knipex Pliers Replace Adjustable Wrench

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

 

I am now replacing my crescent wrenches and other pliers with the Knipex pliers. Now, I do not use this. I saw it for sale and it wasn’t expensive and I bought it and I just hang it on the shop wall, so I just thought I would show you. So this is what I use. I’ve been using this forever and in my installation kit, in my everyday carry. I saw this. I am very, very happy with my Knipex tools, so I thought I’d replace this crescent wrench in my everyday carry and it’s getting heavy, but I’m trying to make it lighter. So I replaced it with this.

So let’s just take a peek at what we got here. So what bugs the heck out of me on my crescent wrench, it doesn’t matter what you’re doing. It always comes loose. So you’re trying to use it, I put up with this my whole life. Unless you got the exact tool you’re needing, but in your locksmith case, this is what I use and I really just need, I use it mostly for mailbox locks. So I’m happy with my other tools. So this is the Knipex pliers and it’s got the little button here. look at wide that goes. So this crescent wrench is going in the spare kit. This is going in my everyday carry, in my tool case. So that’s the Knipex. Look at that. No matter what angle it does, it’s locked in. It’s not gonna move on me ’til I push the button and move it where I wanna go. So this is gonna be really handy and

Knipex Pliers

Ia going to show you how I use it on a mailbox lock. So this is my mailbox lock. The Mailbox lock kit has all the different tail pieces for it. So let’s just put this tail piece on there for now. Just for the demonstrations. Normally, I usually install it first and then I put this on last. I’m trying to make this good for the camera to see. Go finger tight. Now what I can do hold my lock. Take the key out, really, put that on there. They are down there just snug. You can really over-tighten these, so be careful. Give a little test. Lube that up. So, perfect. So this tool has replaced my crescent wrench. So this Knipex pliers has now replaced my crescent wrench, which for years has driven me nuts, but I didn’t really have anything better. This is way better. I willl be using this every day now and soon I will have some more videos with this in action on job sites.

Hope you enjoyed the video. Please like and please subscribe. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Knipex Piler Review:

 

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

 

 

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

My Lock Picks Mr Locksmith Vancouver West

My Lock Picks Mr Locksmith Vancouver West

 

Mr. Locksmith™ Vancouver West

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Vancouver West can help you. Call Emergency Locksmith Vancouver West British Columbia.

Mr. Locksmith Vancouver West: (604) 760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Knipex Pliers Replace Adjustable Wrenches Mr. Locksmith Vancouver West

Knipex Pliers Replace Adjustable Wrenches Mr. Locksmith Vancouver West

Filed Under: Knipex Plier, licensed BC locksmith, Licensed Locksmith, Locksmith Near Me Vancouver West, Locksmith Services, Locksmith Training, Locksmith Vancouver West, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: , , , , , , , , , , , ,

Knipex Pliers for the Locksmith | Mr. Locksmith™ Vancouver West

By

Knipex Pliers for the Locksmith: KNIPEX pliers stand for quality made in Germany. Worldwide leading pliers manufacturer for professional users in trade and industry.

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

Knipex Cobra XS 4 inch Piler

You hear the expression, especially when it comes to tools, “Cry once when you buy it or cry twice when you have to replace it.” You buy quality tools, you really save yourself a lot of time and money over the long haul. Same thing with key machines. I’ve got key machines that are 35 years old. They work absolutely perfect. They work some better than some of the new ones. That’s another story. But a couple of years ago, I bought the Knipex bolt cutters for cutting screws and tail pieces on locks. And because of that, I’ve now purchased, I’ve gone into the little tiny, probably the most expensive pliers I ever bought, the Knipex a pliers.

Knipex Pliers

This is in my pick kit, my EDC. I’ve replaced my crescent wrench with this little Knipex. With pliers, it’s basically replaced my crescent wrench. I’ll never go back to a crescent wrench. I’m actually now looking at the larger one, I still use a large crescent wrench for when I install with my pit ball, which is another video, when I’m installing latches on steel doors. So I’m gonna get the bigger set and that’ll be the next thing to add And these two tools, I call them channel locks, but they’re actually called water pump locks.

If I got to grab something, these are unbelievable. So this is in my tool case for every day. This is in my backup kit for when I have to do something a little bit more heavy duty. The power of these and the gripping power is unbelievable. I was in the rain the other day and some of my other tools that were getting rusty, my fault, I should have oiled them down. These things still look brand new. I’ve had excellent luck with these.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

So I’m extremely happy with my Knipex pliers. Very, very happy. I’m gonna add a few more and you’ll be seeing them in future videos as I’m doing jobs. So these are the very best pliers you can buy. If you look at the Mack Trucks, I think even Snap-On, they’re carrying the nitpicks line in there. I don’t know if they’ve rebranded them, but you can buy these at your, they’re a little bit harder to find at your big box hardware stores ’cause they’re trying to flog their in-house brands. The advantage of buying off of a, I call it the big box trucks, is if something breaks, it’s very easy to do a replacement.

I haven’t had to replace the thing yet, but it’s extremely easy with other Snap-On tools I have, especially my circuit pliers. I tend to break them every couple of years. They just give me a new one. I have some screwdrivers and some Snap-On ratchets and whatnot. If I crack them, they replace them instantly. So I love my Snap-On truck guy and I love the Mack tools guy. That’s the two I like. The tools are good and a lot of them are selling these lines. So it’s just to go in and get a replacement.

Mr. Locksmith™ Vancouver West

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

 

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Vancouver West can help you. Call Emergency Locksmith Vancouver West British Columbia.

Mr. Locksmith Vancouver West: (604)760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Knipex Pliers for the Locksmith

Knipex Pliers for the Locksmith

Filed Under: licensed BC locksmith, Licensed Locksmith, Locksmith Near Me Vancouver West, Locksmith Services, Locksmith Training, Locksmith Vancouver West, Locksmith Videos, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: , , , , , , , , , , ,
Next Page »