Ask Mr Locksmith Vancouver West: What position should Deadbolt be pointing?

Ask Mr Locksmith Vancouver West: What position should Deadbolt be pointing? Mr. Locksmith Vancouver West answers one of the most frequent questions he’s been asked about. Check out the video below to find out what the answer is. Apparently, it depends on the manufacturer of the lock and when/where it is manufactured.

Ask Mr Locksmith Vancouver West: What position should Deadbolt be pointing?

Mr. Locksmith Vancouver West (604)760-7620

Mr. Locksmith Automotive Vancouver West: (604) 259-7617

Best Residential Door Lock Vancouver West

If your door locked you out and need a locksmith in Vancouver West, call Mr. Locksmith Vancouver West if you need 24-hour lockout services. House lockout, car lockout, call Mr. Locksmith Vancouver West. Re-key door locks, door lock repair, rekeying locks, door lock change, Mr. Locksmith Vancouver West is there it help.

Best Residential Deadbolt Vancouver West

If one gets locked out he knows that it will not be an easy job gaining access through a residential Deadbolt. Most deadbolts, especially the high security ones need be drilled open. Additionally, there are times that you will be spending alot of time, effort and money trying to destroy a deadbolt. Mr. Locksmith Vancouver West leads all locksmith services provider across Vancouver West. Call Mr. Locksmith Vancouver West (604)760-7620

Ask Mr Locksmith Vancouver West: What position should Deadbolt be pointing?

Best Position for a Deadbolt

I had an interesting question. They said when the deadbolt is locked they like it from the inside, they can see that it’s locked. Now, most manufacturers, if it’s locked, the thumb turn would be turned that way. And here’s a high security lock, it’s a medical high security. So when it’s locked, so you can look at a distance, it’s locked. You don’t have to go up to the door you can just look at it. So most North American made locks. The exceptions are the smart key, the quick sets. What they do sometimes is they got the little lock symbol on top. So, and they got a little arrow here. So what happens is you can actually see it, it says locked. Where the other manufacturers it’s when it’s out, it’s locked. \

So again, most like that, it’s in the locked position you can tell the quick sets, have a little lock thing. Now, when we have the offshore locks and you know how I dislike offshore locks, they are usually timed wrong. The, they put together the deadbolt wrong and I’ve gone to jobs and I fixed it. So when it’s in this position it’s locked, this position’s unlocked. But because somebody put it together wrong when I re-key it, I put it together properly. And then the customer says “Oh, it’s reversed to how I had it.” So it’s what people are used to.

Ask Mr. Locksmith

The proper way, again, depending upon their locked manufacturer, this would usually be in the locked position you can tell from a distance. Except for certain manufacturers, they’re putting locked on it and offshore stuff could be any which way there’s no rhyme or reason to it. And sometimes we can time ’em. So when it’s horizontal, it’s locked and sometimes we can’t.

So I hope this answered a bit of your question. It’s not as simple as I, I would’ve thought because in the old days it was all, that was the locked position. We’re getting the other locks. They’re putting locked on it now so you can tell. I hope you enjoyed watching this video. Subscribe to my channel. Also visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced. As well as my covert methods of entry and my non-destructive methods of entry.

If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Vancouver West can help you. Call Emergency Locksmith Vancouver West British Columbia.

Filed Under: Ask Mr. Locksmith, Become A Locksmith, Best Deadbolt Position, How To Become A Locksmith, Locksmith Near Me Vancouver West, Locksmith Tips, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: Ask Mr. Locksmith, Best Deadbolt Position, Best Deadbolts, Best Residential Deadbolts, Deadbolt Locks, How to Become a Locksmith, Locksmith Tips, Mr Locksmith, Mr. Locksmith Vancouver West, Terry Whin-Yates

How To Cut a Kwikset Bump Key – Mr. Locksmith Vancouver West

How To Cut a Kwikset Bump Key: Terry Whin-Yates, president and CEO of Mr. Locksmith gives a demonstration on how to make a Kwikset bump key cut. Bump keys are special keys that can avoid security built into traditional locks. As shown on the video below, Terry uses a book that looks to be a specially made book for key makers like himself. Here’s that 2 minute video:

@mr.locksmithHow to make a Kwikset Bump Key. #bumpkey #mrlocksmith #locksmith #locksmiths #locksmithservice #locksmithing #locksmithguy #locksmithservices #kwikset ♬ original sound – Mr. Locksmith

Mr. Locksmith Vancouver West: (604)760-7620

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

How To Cut a Kwikset Bump Key – Mr. Locksmith Vancouver West

Filed Under: 24 Hour Locksmith, Become A Locksmith, How To Become A Locksmith, Locksmith School, Locksmith Services, Locksmith Stories, Locksmith Training, Locksmith Vancouver West, Make A Kwikset Bump Key, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: Bump Keys, Certificate in Institutional Locksmithing, How To Make Bump Keys, Kwikset, Kwikset Bump Key, Locksmith Guy, Locksmith Services

Open Puzzle Padlock – Mr. Locksmith Vancouver West

Open Puzzle Padlock: Terry Whin-Yates, president and CEO of Mr. Locksmith shows us how to open a puzzle padlock. He gives a little bit of a background while giving a demonstration on how to lock and unlock a certain puzzle padlock . While this particular padlock is a cost-effective one, unlocking it still looks like fun!

@mr.locksmithOpen Puzzle Padlock 001. #mrlocksmith ##locksmith ##locksmiths ##locksmithservice ##locksmithtraining ##locksmithguy ##p#uzzlelock ♬ original sound – Mr. Locksmith

Mr. Locksmith Vancouver West (604) 760-7620

Puzzle Padlock – How to Open

Filed Under: Become A Locksmith, Blog, How To Become A Locksmith, How To Open A Puzzle Padlock, Locksmith Near Me Vancouver West, Locksmith Services, Locksmith Stories, Locksmith Training, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates Tagged With: How to Open Puzzle Padlocks, Locksmith Services, Mr. Locksmith Vancouver West, Puzzle Padlock, Terry Whin-Yates

Hands-On Locksmith Class Langley | Canada 2021

Hands-On Locksmith Class Langley BC | Canada September 2021: The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

Mr. Locksmith Training Website

Hands-on Locksmith Training Langley | Mr. Locksmith

Call or TEXT Terry Whin-Yates at 1-604-773-5625 email: [email protected]

Note: Camping August 01-15, 2021 maybe a little bit difficult to talk with me but leave a text message or email and I will return your call when I have a signal.

To Sign-up for The 4 Day Hands-on Locksmith Langley class go to Mr. Locksmith Training.

4 Days Hands-on Locksmith Training: LANGLEY BC.

LANGLEY, British Columbia Canada

September 6-9, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
September 13-16, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
September 20-23, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
October 4-7, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada

More Cities SOON!

Become a Locksmith

The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

Lock Picking
Rekeying Locks
Master-keying
Padlocks
Key Blank Identification
Duplicating and Cutting Keys by Code
How to open malfunctioning locks
How to open vandalized locks
Bypass Techniques
Stand Alone Access Control
Lock type identification, installation and service
Padlocks (rekey and how to open locked padlocks)
High Security Locks
Hands-On Locksmith Class Langley
Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

Real hands-on locksmith class designed to teach beginner Locksmiths, engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Our Mr. Locksmith Professional Locksmith state-of-the-art training provides hands-on comprehensive knowledge about locking and unlocking principles, security issues, and effective use of cutting-edge products.

Locksmith Training

During the 4 Day Hands-On Locksmith Class taught by Terry Whin-Yates each student will cut over 25+ keys per student (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Learn the two most popular methods of picking locks and my own technique that I have developed over the past 35 years to pick open locks.

There are many advantages to having a professionally trained Institutional locksmith on staff. Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced. Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities. This will also provide significant cost savings over calling a contract locksmith. This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in-house.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Bringing your locksmithing in-house will save you time, money and provide better security.

To Sign-up for The 4 Day Hands-on Locksmith Langley class go to Mr. Locksmith Training.

How To Pick Locks – Online Course

Regularly $397 – NOW ONLY $97 US

Starts September 6, 2021 (Zoom & On-Line)

To Sigh-up for the Online “How to Pick Locks” go to Mr. Locksmith Training “How to Pick Locks”

Locksmith Pick Gun

Become an Automotive Locksmith

On Certificate in Automotive Locksmithing
2,500.00$USD 1,500.00$USD

On-Line Automotive Locksmith Training

Code Machines to make car keys
Vehicle codes and making keys
Transponder Keys, Duplication, Cloning and Programming
How to Make Keys to Ford, Chrysler, Toyota and Honda
How to Make Key to GMs
How to Make Keys to Japanese cars and Trucks
How to Make Keys to Korean Cars
How to Make Keys to Motorcycles
Ford Focus Ignition
Ford Focus Ignition – $49.95
Repair Honda Ignition – $49.95
How to open cars – $395.00
All the videos on how to rekey the car locks
Programming Tools
Clone Car Key
Special Automotive Lock Picks (Lishi, etc.)
Keys Locked in Truck
Protecting Service Trucks (Alarm to Hockey Puck Locks)
Introduction to Advertising Your Automotive Business
Zoom Conferencing every two weeks or by appointment

Exam: Optional On-line exam is 200 questions.-Line Institutional Locksmith Class

Online Institutional Locksmith Class

On-line and Zoom Institutional Locksmith Class (Starting September 6, 2021)

To Sign-up for The Certificate in Institutional Locksmith go to Mr. Locksmith Training.

12 – 24 Months Institutional On-Line Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, etc.).

There are many advantages to having a professionally trained Institutional locksmith on staff. Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced. Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities. This will also provide a significant cost savings over calling a contract locksmith. This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in house.

Bringing your locksmithing in-house will save you time, money and provide better security.

The training in this Institutional Locksmith course will provide you with the skills necessary to become a more efficient and competent technician who can service, install, troubleshoot and masterkey, industrial lock systems.

This On-Line and Hands-on Institutional Locksmith Training gives you the opportunity to have professionally trained Locksmith’s on your property daily. This saves you money, time, secures your facilities, resolves security issues, gives you the first line of defense and improves your Facility Management. This program was designed for the beginner as well as the experienced locksmith. We take you from the first steps in locksmithing to advanced locksmithing.

Complete Series: Includes all Introduction to On-Line Institutional Locksmith Training and an added Bonus the Consumer Safe Series (Sentry Safes, First Alert Safes, Hotel Safes, etc.) and Institutional Safes.

Rekeying Locks
Master-keying
Key Control
Institutional Software for Key and Lock Control
High Security Locks
Emergency Lock Down Procedures
Emergency Lock Down Locks and Doors
Servicing Panic Hardware
Padlocks
Key Blank Idenfication
Duplicating and Cutting Keys by Code
How to open malfunctioning locks
How to open vandalized locks
Bypass Techniques
Stand Alone Access Control
Integrated Access Control
Panic Hardware
Door Closers
Securing High Risk Areas
Lock type identification, installation and service
ANSI/BHMA standards
Padlocks (regular to High Security)
Safes
Suppliers
Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

* Help with key control and master keying issues
* Help with technical information
* Help locating parts, supplies, key codes, etc.
* Help communicating internal needs to their institution.
* Help with electronic or access control issues.

Duties of an Institutional Locksmith

Duties of an Institutional Locksmith include installing, adjusting and repairing locks, making keys, and changing lock combinations. Locksmiths work on residential, automotive, commercial and institutional lock sets and door hardware. Locksmiths may also install and maintain more sophisticated security systems.

In general, the duties of an Institutional Locksmith include:

servicing and installing high-security lock systems and key control systems, window bars, deadlocks, and keyless entry locks
repairing, replacing, or adjusting damaged or defective components of an entrance or exit door, including door closers, hinges, electric release mechanisms and sometimes the door itself
changing lock key combinations by inserting new pins into locks
designing complex master key systems for industry, governments, and institutions

Institutional Locksmith Working Conditions

Usually, Institutional Locksmiths work a five-day week but maybe on-call nights and weekends to respond to emergencies. Some Institutional Locksmiths are may be required to work longer hours and have clerical duties related to running and maintaining larger facilities. Some Institutional Locksmith shops, especially mobile units, maybe small and crowded, requiring Institutional Locksmiths to work around benches, counters and stock. They sometimes are required to work in awkward or confined spaces. Those working in mobile units may be required to work in adverse weather conditions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

Hands-On Locksmith Class

How to Pick Locks: Hands-On Locksmith Class

Lab Wedge Pin Kit. Great for the Locksmith Shop or Service Truck

Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training https://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Lock Picks & Tension Wrenches

Terry Whin-Yates safe opening

Keyless Door Lock Vancouver West

Filed Under: Become A Locksmith, Locksmith Training, Mr. Locksmith, Mr. Locksmith™ Tagged With: Become a Locksmith, Best locksmith training courses, Certified locksmith training, Certified locksmith training near me, hands-on locksmith training, How to Become a Locksmith, How to Become a Locksmith in BC, How to become a locksmith in Canada, Locksmith apprenticeship, Locksmith course online, Locksmith Training, Locksmith Training BC, Locksmith training Canada, locksmith training course, Locksmith training courses near me, Locksmith training Kit, Locksmith training school, Online locksmith course Canada

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Mr. Locksmith Vancouver West: (604) 760-7620

How To Cut A Kwikset Key Triton Key Machine: The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. Triton states they can cut 99% of all commercially available car and motorcycle keys, including single and double-edge, high security, tibbe (6 and 8-cut) and tubular. Custom search functions include the ability to search by vehicle model, keyway or IC card number. In this video, we cut a Kwikset Key (ilco KW1 Key Blank). Triton also contains a comprehensive database of commercial & residential keys and can even generate dimple cut keys.

The Triton code machine is a high-security code machine. So I’ve been using this machine for a couple of weeks now, so far happy with it. First of all, this only, the screen only comes up so far and I can see people yanking at this, I just leave it down, unless I am videoing. The interesting thing is whether this is up or down, it will still cut. So, which is great for me because I don’t have to jerry-rig anything to video. So, but it is a safety feature, this will still cut with this open. Which I don’t have a problem with, but we have to think of the stupid people out there. And can it cut a Kwikset key? Here’s a Kwikset series. I can check my KW1 blank, my key blanks right here listed under key blanks, ESP KW1, go through all my numbers all the different manufacturers, we have ilco there. It’s got all the main ones. The menu displays which jaw I got it on. It says this one should be on a B. Says it has to be cut on a B. Let’s put the key in and that’s a shoulder, check. So I have t it set up to B and I put my input. So I going to cut this. Let’s just cut it as a two, one, three, four, two and it takes it. Then I go okay, I press cut and we will go look at the screen. Now here are my options. So there’s laser-cut, which I don’t like. I like the look of the traditional key. Make sure it is on that. It’s all set up properly and press cut. Okay, now we have a Kwikset key.

Now, one thing when you are cutting the keys the machine needs a metal key brass, metal, etc. I guess because when it is setting up it must put a little bit of a charge. Do not use composite keys, no plastic keys. You will probably risk damaging the machine and I can see that, cause I think it must have some little sensor in there a little bit of electricity or something like it as it is going on there The instructions state “do not use composite keys.” No plastic keys, 3D printed key blanks, etc. I do not know the exact reason but I imagine it is because it must put out a small electrical charge. I guess aluminum keys would be okay because aluminum is a conductor of electricity Brass Key blanks of course and the metal keys and all our other different alloys but nothing that are plastic or composite key blanks. I hope you enjoyed watching this video.

Triton Key Machine Series:

Triton Key Machine Unboxing

Triton Key Machine Decodes & Cuts Ford Key (8 Cut)

Honda High Security Key Decode & Cut | Triton Key Machine

The Triton by Lock Labs is an all-in-one key cutting machine with the ability to generate & duplicate keys. From automotive to residential, tibbe to tubular and even key engraving. Controlled by a 7” touchscreen, the Triton provides step-by-step guidance throughout each of its features, making it one of the easiest key cutting machines to operate. Though its core operations are very intuitive and feature for more seasoned users or for those who will read the manual.

The Triton’s direct duplication feature traces and cuts unknown keyways for those rare instances you have an original key and a compatible blank but no space and depth information.

How-To-Cut-A-Kwikset-Key-Triton-Key-Machine-Vancouver-West

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

Triton Key Machines Features:

A 12-volt power adapter (sold separately) that will allow you to operate the machine with nothing more than the power from your vehicle cigarette lighter.
Unlimited, free updates for the life of your machine. Machine updates occur via Wi-Fi (no need to connect to your PC).
Removable chip tray for easy clean-up without having to unmount the machine from your bench or vehicle.
Bolt down kit (sold separately) for the safe and secure mounting of your machine to the surface of your choice.
A patented 4-way jaw (included) design that is capable of handling an overwhelming majority of all automotive key cutting needs.
A fully-integrated, all-in-one design that includes onboard storage for all cutting bits and tracers.
2-year warranty which protects against all machine failures that result from flaws in manufacturing.

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

List of recommended & replacement accessories:

TRJ2 Single-Sided Jaw (residential, commercial and single-sided automotive)
TRJ3 Tubular Jaw (decode and cut tubular keys)
TRJ4 Tibbe Jaw (decode and cut tibbe keys)
TRJ5 Engraving Jaw (customize customer keys with your logo or help them stay organized with key labels)
TRC4 Engraving Cutter
TRC3A Sharp Dimple Cutter
TRC3B Shallow Dimple Cutter
TRD2 Dimple Decoder
TRC1 2.0 Standard Replacement Cutter
TRC2 1.9mm Cutter
TRD1 Standard Replacement Decoder
TBD1 Mounting Kit
TRA4 12-Volt Vehicle Power Adapter (fully power your Triton with nothing more than than a vehicle cigarette lighter)

So stand by for more videos, it is going to be interesting.

For Locksmith Training, Hands-On Classes and Online Locksmith Training go to Mr. Locksmith Training Website

Mr. Locksmith Vancouver West: (604) 760-7620

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/

How To Cut A Kwikset Key Triton Key Machine

How To Cut A Kwikset Key Triton Key Machine | Mr. Locksmith Vancouver West

triton key machine manual, triton key machine youtube, triton key machine engraving, triton key machine calibration, xtool triton, best automotive key cutting machine, triton keyboard, Triton Key Machine Automotive keys, Triton Key Machine car keys, Tibbe Keys, Tubular Keys, Acc Keys, Duplicates Car Keys, Duplicates Automotive Keys, Motorcycle Keys, Copy Car Keys, Decodes Car Keys, Key Cuts, Keys Duplicated, How to Cut a KW1 on a Triton Key Machine, Decode KW1 Key, Cut KW1 Key,

Filed Under: Become A Locksmith, How To Cut A Kwikset Key Triton Key Machine, Locksmith Near Me Vancouver West, Locksmith Vancouver West, Locksmith Videos, Mobile Locksmith, Mr. Locksmith, Mr. Locksmith Vancouver West, Mr. Locksmith™, Mr. Locksmith™ Vancouver West, Terry Whin-Yates, Vancouver West Locksmith Tagged With: best automotive key cutting machine, Copy Car Keys, Cut KW1 Key, Decode KW1 Key, Decodes Car Keys, Duplicates Automotive Keys, Duplicates Car Keys, How to Cut a KW1 on a Triton Key Machine, Key Cuts, Keys Duplicated, Locksmith Near Me Vancouver West, Locksmith Vancouver West, Motorcycle Keys, Mr Locksmith, Mr. Locksmith Vancouver West, Terry Whin-Yates, Tibbe Keys, Triton Key Machine Automotive keys, triton key machine calibration, Triton Key Machine car keys, triton key machine engraving, triton key machine manual, triton key machine youtube, triton keyboard, Tubular Keys, Vancouver West Locksmith, xtool triton

Mr. Locksmith Franchise for Sale Abbotsford BC | Call (604) 200-8622

https://mrlocksmithabbotsford.com/

Call Terry at Mr. Locksmith Abbotsford ((604) 200-8622

Hi, I’m Terry from Mr. LockSmith. I am looking for a franchisee for Mr. LockSmith Abbotsford. So for Abbotsford, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

More importantly, the training program teaches you how to become a businessperson. How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer.

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Abbotsford.

Call Terry at Mr. Locksmith Abbotsford(604) 200-8622 or email [email protected]

Mr. Locksmith Abbotsford For Sale

Filed Under: Abbotsford Locksmith, Become A Locksmith, Blog, Locksmith Abbotsford, Locksmith Near Me Abbotsford, Locksmith Training, Mr. Locksmith, Mr. Locksmith Abbotsford, Mr. Locksmith™, Mr. Locksmith™ Abbotsford, Terry Whin-Yates Tagged With: Abbotsford Locksmith, Become a Locksmith, How to Become a Locksmith, Locksmith Abbotsford, Locksmith Business For Sale, Mr Locksmith, Mr. Locksmith Abbotsford, Mr. Locksmith Business For Sale, Mr. Locksmith Franchise, Terry Whin-Yates

(604)760-7620